Logic 4.7 platinum please help with Creamware ASIO

nigeljacotine · Post by **nigeljacotine** » Wed Jul 30, 2003 6:24 am

Hi there,

I am running a mac dual G4 with pulsar 2 and SCOPE PLATFORM 3.1
So far I have got an audio signal into scope platform. I want to send the signal to logic but I cannot select a driver for ASIO in the hardware preferences menu. There is a control panel button but it does nothing when it is pressed.
The creamware asio driver is installed in a folder inside logic directory but i cannot select an ASIO driver for the life of me.
I am lost !!! 1 week spent so far trying to work this out.

samplaire · Post by **samplaire** » Wed Jul 30, 2003 7:41 am

What does your SFP project look like? It should contain at least one Pulsar/Scope/Luna HW audio input (analog or digital) , at least one output and obligatory - asio input/output modules to be seen by Logic. Without ASIO ins/outs Logic or any other sequencer cannot communicate with SFP

[ This Message was edited by: samplaire on 2003-07-30 08:43 ]

samplaire · Post by **samplaire** » Wed Jul 30, 2003 7:45 am

There is a second option - if your SFP project is slaved to any external device via SPDIF (AES/EBU if you have such) and the device is off then asio is invisible for Logic.

nigeljacotine · Post by **nigeljacotine** » Wed Jul 30, 2003 8:40 am

Hello sir,

I do not have any digital/aes/spdif connected at all. I have the asio modules loaded in my scope page but when Logic is loaded it says that no ASIO driver is selected. This has trumped me as I cannot get past this stage.

Thank you for your reply

borg · Post by **borg** » Wed Jul 30, 2003 9:17 am

did you copy the creamware asio driver into logic's asio driver folder?

if so, open SFP first (as always...) make sure you have your asio dest/source modules loaded, then start Logic...

normally you shouldn't have a problem after doing this. (don't feel personally attacked, but the only time i saw this kind of message, was when i was trying out different sequencers when i was starting out. cracks of course... or when starting the sequencer BEFORE SFP)

in cubase it is normal you cannot open the asio control thing... it is all done in SFP, see ULLI settings.
hope this helped.

nigeljacotine · Post by **nigeljacotine** » Wed Jul 30, 2003 10:30 am

Hi Borg,

Do you think that my copy of Logic might be the problem because i am using a dongle emulator? I have installed the driver in logics ASIO directory and the ASIO modules are loaded. When i start Logic it ask to turn apple talk of for OMS setup and as it goes to load it says ASIO driver not selected error -10027. I have the latest OMS installed and I cannot figure it out.

Cheers

[ This Message was edited by: nigeljacotine on 2003-07-30 11:33 ]

samplaire · Post by **samplaire** » Wed Jul 30, 2003 12:21 pm

AppleTalk should be off for most audio purposes. Also make sure VirtualMemory is off in the Memory control Panel

To allow us to figure out your problem - just tell us the whole string of things you do after turning your computer on.

Also, please, tell us the version of SFP you use - 3.1? 3.1a? 3.1b? 3.1c?

Perhaps an extension conflict occured in your system?????
_________________
Sir Sam Plaire Scopernicus

[ This Message was edited by: samplaire on 2003-07-30 13:25 ]

nigeljacotine · Post by **nigeljacotine** » Wed Jul 30, 2003 10:18 pm

Here I go Sir,

After loading OS9.2 I open SFP version 3.1c for mac. In the routing window all my connections are loaded including ASIO dest/source. I then load the dongle emulator for Logic 4.7 platinm. I then load logic. After intializing it gets to the drivers and initalizes mac av driver but not the ASIO driver. Instead it says ASIO driver not selected (-10201). Oms then comes up asking to turn apple talk off which I click yes to. OMS then says something about (you may need to check a midi/thru switch) I click OK
Logic then finishes loading.
I try to select the ASIO driver in Logic but nothing happens.
I have also just turned virtual memory off.

samplaire · Post by **samplaire** » Thu Jul 31, 2003 2:10 am

Ok

- try to trash some preferences - logic prefs, sound prefs;
- delete oms prefs and reinstall oms then prepare a new oms setup leave only quicktime and iac drivers - delete CW drivers and those of your midi interface (just for a test), in oms setup enable 'play in background', in oms prefs disable 'use dma' or something similar.

Perhaps it's midi causes the problem (computers, like women, say sometimes something different than expected

).

If none helps try to find THE answer in this Logic user forum: http://community.sonikmatter.com/emagic/ultimatebb.php

Good luck

nigeljacotine · Post by **nigeljacotine** » Thu Jul 31, 2003 2:46 am

Hi Sam,

I am not sure where to go to make these preference changes. And where do i find these drivers. I am a little slow in the audio game!! Also should I install the older version of OMS as someone said in one of the forums?
Love the midi analergy.

samplaire · Post by **samplaire** » Thu Jul 31, 2003 3:55 am

All the preferences are located in "System Folder/Preferences".

I don't think older OMS will solve your problem

When preparing the OMS setup you have to delete the drivers from the OMS setup application window, only. It's done by clicking on a desired driver icon then hitting backspace key.

samplaire · Post by **samplaire** » Thu Jul 31, 2003 8:59 am

If you want me to write you steo-by-step guide on how to install/operate all the elements in your Mac DAW then PM me and I'll do it for you

samplaire · Post by **samplaire** » Thu Jul 31, 2003 7:04 pm

There is one more thing you should take for consideration: the memory amount. I just realized it can be your problem! If you have 256MB of RAM then forget about smooth operating. 512MB is essential.

nigeljacotine · Post by **nigeljacotine** » Fri Aug 01, 2003 12:09 am

Hi Sam,

i tried all those changes with the oms and drivers but still the same error. I have plenty of SD ram in the computer so it is not that. I will have to keep tinkering I guess. This is so frustrating. Thank you so much for your time and hints.
Cheers Nigel

Post by **garyb** » Fri Aug 01, 2003 12:39 am

from what i've seen in various forums,a dongle cracked version will never work properly.

nigeljacotine · Post by **nigeljacotine** » Fri Aug 01, 2003 5:57 am

I think i am gonna frok out some money and get Logic. Is anyone selling Logic platinm 4.7?

Cheers

samplaire · Post by **samplaire** » Fri Aug 01, 2003 6:32 am

http://search.ebay.com/search/search.dl ... c+Platinum