DSP load chart

Cochise · Post by **Cochise** » Thu Jul 05, 2007 7:00 pm

Sorry, i'm quite tired now to do a search for this so, where can i find a DSP load chart related to Modular III and Flexor 1.5 modules???

Lima · Post by **Lima** » Sat Jul 07, 2007 11:18 pm

here for example:
http://www.cwmodular.org/

Cochise · Post by **Cochise** » Mon Jul 09, 2007 6:33 am

Thx Lima

.
It's often useful for me to be aware of the modules load.

Lima · Post by **Lima** » Wed Jul 11, 2007 10:00 am

Are also very interesting the informations about the max polyphony of certain modules

widy · Post by **widy** » Mon Jul 16, 2007 11:15 pm

are the 3 numbers for 96 48 and 44 khz ..is this right ?

Lima · Post by **Lima** » Thu Jul 19, 2007 1:02 pm

yes, If I don't remember bad

radar23 · Post by **radar23** » Wed Sep 12, 2007 7:31 pm

Hi,

The numbers on the cwmodular site refering to the dsp load for 96 48 44,1 kHz, as detailed above, but do these numbers refer to percentage load (%) of a particular scope cards? ie 6 sharc card as 14 sharc card?

thanks

roy thinnes · Post by **roy thinnes** » Thu Sep 13, 2007 12:16 am

To calculate the dsp usage, I'm using the following procedure:
I load a project with just the Modular(2 or III) synth, samplerate is 44.1kHz. The dsp load now is [6.5]. When a module is added into the Modular, the dspLoad rises, e.g. let's take a SSBPhaser module: it's [21.40] now. Then this number is typed into a spreadsheet which subtracts the ModularSynth dsp usage [6.5], which makes a dspLoad of [14.90]. Because these values are varying by adding more modules, I'll add another SSBPhaser. The new dspLoad is 33.30. Subtracting [21.40] gives [11.90] for the second module. The third value is calculated accordingly.
I think that's an applicable way for (approximate) dsp usage diagnostics.
ps: of course the dspLoad values are true for all kind of Scope cards. It's just the Sample freq that counts.