Luna "wiring" problem

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
User avatar
MrV
Posts: 254
Joined: Tue May 20, 2003 4:00 pm
Location: Melbourne , Australia
Contact:

Post by MrV »

Hello ,
Has anyone had this problem ?
I've built a portable recording system ...a P4 2.6G in a small footprint "MiniQ" case ...has 1 pci slot for a Luna card with additional adat backplate . All working great except when I reload an existing project some of the audio wiring in the project window is incomplete...for example,1632mixer aux1 and 2 to luna adat dest 1 and 2 is not connected ...it was before I saved project ...or masterverb is not connected to 1632 Rt1 L/R when it was before , etc . I've tried re-installing Luna/Scope software , hasn't helped .
Very weird .
Any ideas folks?
Regards,
Michael
Counterparts
Posts: 1963
Joined: Tue Aug 19, 2003 4:00 pm
Location: Bath, England

Post by Counterparts »

It's a UI issue, not a wiring one :smile:

Check to see what the Live Bar is reporting with respect to the connections. The Masterverb always appears to be disconnected when in fact it is still wired up OK.

Royston
Guest

Post by Guest »

try rebuiding the project new and see.
User avatar
MrV
Posts: 254
Joined: Tue May 20, 2003 4:00 pm
Location: Melbourne , Australia
Contact:

Post by MrV »

Thanks guys .
Counterparts... I'll often get,for example, Masterverb just with one output wired instead of the 2 outputs....and the unwired return really is unwired, signal from the other side only. Don't use Live Bar , maybe I should have a look at that as you suggest .Cheers, M
Post Reply