My system: Luna II with ADAT-extension (together two z-link-ports) and a Pulsar SRB. I want to connect my A16 Ultra via Z-Link, but I don't get a signal in the mixer.
I can install the Z-Link-sources and connect them, but there is no signal on the mixer. The A16 ultra works fine with the ADAT-Sources, but I want to use Z-Link. I bought several cables (I suggest they are 6 poles, very expensive...), no way.
I testet connecting the power connection to the extension-card - no difference...
Has anybody this configuration working?
Any hints?
There are Luna ZlinkA and Luna ZlinkB modules - both in and out - 4 Zlink modules total. Put them all into your project and be sure you're wiring the I/Os from the correct module (must match the physical IOs of the wires you connect to your A16 Ultra). I have my A16 Ultras connected via Zlink and they work perfect.
Hi,
shure I connected the Z-ing sources and dest. correctly. I started the pc after this, but I don't get any signals. In XTC-Mode the Z-Link connections are outgreyed.
May be a hardware problem? What kind of cables you're using (brand?)?
Hi folks !
Who knows - is capable to connect 2 CW cards via Z-Link (each card installed in separate computer) ???
I think about two PC machines and Steinberg's VST-Link (Cubase SX).
Ciao !
