Quick advice needed on 3 cards and stdm cable

[geoffd99]

Hi all
I have 2 Lunas, and a SRB. I have lost the hardware install manual and it is not anywhere in pdf.

I assume one cable between all 3, is that correct.
Where should the cable go, to the SRB, there are 2 possibilities, forward most (near I/O) or rear (Luna connecter is at mid point).

I recall I install hardware, windows finds them, then install from the scope 4.0 folder I have (4.5 never worked).

Thanks
Geoff

[babaorum]

ever near I/O.

[geoffd99]

Ok thanks!

[dante]

I have 2 x LunaII + I x Pulsar 2 - all linked with one cable.

You can link with 2 as well.

Heres some more info :

http://www.hitfoundry.com/issue_10/stm_mast.htm