my soundcard doesn't play

[DocT]

I'm a owner of the Creamware Scope Professional, that it introduces the following anomaly: the software Scope FP 4,5 does not allow neither to play and neither to record. In fact the DSP meter filler the values of 0 in sync and async.
The problem not verification always.

I forgot, the card does this problem give a little time, but they do not give this I had acquired it... The card has been acquired used on ebay....

How I can resolve this problem?

Hi,
DocT

[Fede]

Ciao, sorry, but I can't understand exaclty your problem, could you explain better how you set things? Are you using xtc mode or sfp mode? What devices in the project?

Fede

[manfriday]

Look at the samplerate screen and see if the samplerate is clocked properly.
If it is not synced up right it can do that sorta thing.

[ali]

In fact the DSP meter filler the values of 0 in sync and async.
The problem not verification always.

I forgot, the card does this problem give a little time, '


can you be specific?? can you post the exact problem. don't interpert it. type it as it comes up on the Screen>

did you make sure your card is not conflicting with other devices??
try reseating it. try another PCI slot.


If you can manage to create this simple connection
you will be able to hear sound and record basic sound into your sequencer


dont forget to at least make sure you have powered Speakers hooked up to the left out and right out on the cable whip that isd hooked to the back of the card.


your sequencer must be started after Scope and that you have selected the proper drivers in your sequencer for Scope.

more info about what you are trying to do exactly will give the rest of us more ideas on how to get you started.