PlanetZ forums - scopeusers.com

hi, recently i've been facing comminication error messages....
using a scope pro and a pulsar2 system.
in the past my abit ic7g used to switch the order of the boards nomater of cset.ini settings.
i think i solved it by setting to "no" the "disable unused pci" in bios.
now once in a while i see that no board is on the system and asks me for scopes serial number.
can you tell me please the appropriate settings in cset.ini file?
i give you the whole file in case you need some info. thanks



[Runpep]
InScreen=1
Language=English
DontRestart=0

[FileBrowser]
All Files=0
STS-Samples=0
LastPath=C:/Scope_4_5/

[AudioFormats]
Wav=Wav

[Installer]
Version=3.0
App=SFP
OS=3.1
ProductID=3

[ReferenceResolver]
MainSetting=
All files_Paths=c:/scope_4_5/;
Modules/Devices_Paths=C:/Scope_4_5/Devices/;
Presets_Paths=C:/Scope_4_5/Presets/;
All files_AutoUse=1
Modules/Devices_AutoUse=1
Presets_AutoUse=1

[StaticPath]
Modules=
Modular=C:/Scope_4_5/Modular2 Modules/
Projects=C:/Scope_4_5/Projects
Effects=C:/Scope_4_5/Devices/Effects/
Presets=C:/Scope_4_5/Presets
HardwareIOs=C:/Scope_4_5/App/Application/IOs/Hardware/
SoftwareIOs=C:/Scope_4_5/App/Application/IOs/Software/
Bitmaps=C:/Scope_4_5/MRC Skins/
Devices=C:/Scope_4_5/Devices
Samples=D:/CREAMWARE STUDIO/All Samples

[Path]
Presets=C:Scope_4_5App
Bitmaps=C:/Scope_4_5/MRC Skins/
Projects=C:Scope_4_5ProjectsExamples

[APPEARANCE]
PotiMoveStyle=4
ToolTips=1
GridY=5
GridX=5
DragWindows=1
StandardCursor=1

[LOAD]
AlignSurfaces=1
LoadMixer=STM 1632.dev
LoadMixerEnabled=1
LoadDefBoard=0

[AUTOCONNECT]
InstrumentToMixer=1
EffectToMixer=1
AudioSrcToMixer=1
DeviceToMidiSrc=2

[SFP]
Favourites_Minimized=1
Favourites_Size=187
FileBrowser_Minimized=0
FileBrowser_Size=321
Dsp Load_SizeY=314
Dsp Load_SizeX=194
Top_Minimized=0
Top_Size=289
About_Show=0
About_PosX=254
About_PosY=14
ControlRanger_Show=0
ControlRanger_PosX=289
ControlRanger_PosY=89
ControlRanger_TopLevel=2000
SFPBar_PosX=-3
SFPBar_PosY=665
SFPBar_SizeX=238
SFPBar_SizeY=331
SFPBar_TopLevel=100000
SFPBar_RestoredSizeY=582
Bottom_Size=142
Bottom_Minimized=1
DSPLoad_Load=1
Dsp Load_Show=1
Dsp Load_PosX=1086
Dsp Load_PosY=637
Dsp Load_TopLevel=2000
Registry_Load=0
ModuleRegistry_Show=0
ModuleRegistry_PosX=315
ModuleRegistry_PosY=-5
ModuleRegistry_TopLevel=2000
Options_Load=0
Options_Show=0
Options_PosX=609
Options_PosY=66
Options_TopLevel=2000
Resolver_Load=0
ReferenceResolveOptions_Show=0
ReferenceResolveOptions_PosX=302
ReferenceResolveOptions_PosY=104
ReferenceResolveOptions_SizeX=332
ReferenceResolveOptions_SizeY=250
SFPRouting_Show=0
SFPRouting_PosX=235
SFPRouting_PosY=0
SFPRouting_SizeX=1047
SFPRouting_SizeY=675
SFPRouting_TopLevel=0
FileBrowser_Show=0
FileBrowser_PosX=626
FileBrowser_PosY=185
FileBrowser_SizeX=261
FileBrowser_SizeY=363
FileBrowser_TopLevel=1
Splitter_Size=0
Splitter_Minimized=1
SFPDesktop_PosX=0
SFPDesktop_PosY=0
SFPDesktop_SizeX=1055
SFPDesktop_SizeY=548
SFPDesktop_Maximize=0
PulsarConfigSurface_Show=0
PulsarConfigSurface_PosX=782
PulsarConfigSurface_PosY=600
PulsarConfigSurface_TopLevel=2000

[SEQPATH]
Path2=F:/____Source Server/scopedat/Devices 3.0 Work/Plug-Ins/MultiClip
Path1=C:/Steinberg/VstPlugins

[ASIO]
XTCMode=0
application=C:/Scope_4_5/App/XTCApp/XTC.pro
Pluginwrapper1=C:/Scope_4_5/App/XTCApp/vstsynthplugin.mdl
Pluginwrapper2=C:/Scope_4_5/App/XTCApp/vstplugin.mdl
Pluginwrapper3=C:/Scope_4_5/App/XTCApp/vstplugin.mdl
Pluginwrapper4=C:/Scope_4_5/App/XTCApp/vsthostplugin.mdl

[XTC-Config]
AddHost=1

[Host]
Scoperev=128

[Host-Config]
Numboards=1
Board0=Host

[RecentFileList]
Entry6=D:/CREAMWARE STUDIO/Creamware Projects/CREAMWARE UNIVERSAL STM4896.pro
Entry5=C:/Scope_4_5/Projects/Examples/CREAMWARE UNIVERSAL STM4896.pro
Entry4=D:/CREAMWARE STUDIO/Creamware Projects/CREAMWARE UNIVERSAL.pro
Entry3=D:/CREAMWARE RELATED TO PROGRAM/Projects/CREAMWARE UNIVERSAL.pro
Entry2=C:/Scope_4_5/Projects/Examples/CREAMWARE UNIVERSAL.pro
Entry1=c:/scope_4_5/app/SFPApp/StartProject.pro
Entry0=c:/scope_4_5/app/SFPApp/NewProject.pro

[hw]
intBlkSize=512

[board0]
boardid=1
[board1]
boardid=0

it works ok now as follows:
scope pro is on pci plot 2.
pulsar2 is on pci slot 4.
cleaned stdm connectors with pure alcool.

i do not know if this is an issue but as long as i cannot get the short stdm cables seen in scopes manual i cut the long stdm cables 3d cards extention(now it works only for two cards, but it is shorter and direct from one card to the other, at least that is the best i suppose according to communication between the two cards).
in cset.ini i typed numboards=2 and i switched the order.
the 6dsp is seen first and the 14dsp second.
one thing i do not understand is the host board setting. i mean since system sees pulsar2 as first isn't it host as well?

dsp loading is very good i think.
ican load till full of dsp power except from some modules that are difficult as sixstring is.
with the big card first and the small second which is the general recommendation i couldn't even reach half dsp meter without a dsp overload message.
i tell you this now: i load minimax and raise polyphony to 16 and it goes in 5 seconds. after there is a little room for a small synth.
i think that this is about what we can get from scope. i am ok with this.
till the time(1 week?) it goes f.. up again