Cubase and Scope Project 4.0

Kidd · Post by **Kidd** » Sat Oct 15, 2005 2:02 pm

1. My creamware card has been functioning for about a month now (I've been playing around with the synth and sampler pack)

I recently installed cubase LE; after installing however it wouldn't open the application, and 2 errors poped up

1. Runner error, Runner file name (runner.dll) lacks A '' (the app id separator)

followed by

2. Scope Driver Iectl (1036) returned error code - 99 (cannot start software because boards or devices not installed)

Considering the scope project alone has been working fine, I have no idea what the problem is.

So I uninstalled the program, got cubase SX from a friend and the same error occured. expect this time another window popped up saying

(Hardware version 13 detected. This hardware requires a software update)

considering I only bought my card a month ago, the latest software is installed. If anyone has run into this problem or knows how I can fix it, it would be greatly appreciated.

thanks a lot,
sincerely,
matthew aaron

astroman · Post by **astroman** » Sat Oct 15, 2005 3:05 pm

your hardware doesn't need any updates - that message pops up when a previously installed board cannot be found anymore, just as your first message said.

cheers, tom

Post by **Guest** » Sat Oct 15, 2005 3:50 pm

try updating the driver from device manager.
does this happen only with Cubase ? did you try other sequencers ?

can you get into cubase at all to be able to select the Scope as a sound card?

<font size=-1>[ This Message was edited by: antar on 2005-10-15 16:51 ]</font>

Kidd · Post by **Kidd** » Sat Oct 15, 2005 4:15 pm

I tried updating the device from the device manager, (using the device driver from the cope cd win2x) It said I had the latest driver.

I used soundforge and audobe audition 1.5 (Both worked fine, and I recorded with soundforge)

Cubase won't open, while intializing the errors occur, and shortly after it disappears

Kidd · Post by **Kidd** » Sat Oct 15, 2005 4:18 pm

astro man, thx for the info, but can you explain why cubase is not detected my scope project? and guide me in the right direction to troubleshoot this problem?

astroman · Post by **astroman** » Sat Oct 15, 2005 7:16 pm

probably not as I don't know much about Cubase
just the obvious things like SFP must be running before you start it and that asio source/destinations have to be in the project

cheers, Tom

Me$$iah · Post by **Me$$iah** » Sat Oct 15, 2005 7:29 pm

First thing i Would suggets is:

Uninstall cubase and the scope software and the creamware drivers.
then reinstall the drivers
then install cubase
then install scope

when that is done open scope. then select the ASIO EZ record--or ASIO EZ playback
let it open

then open cubase

it should open fine
cept youll get a message about XTC

try that and come back

Post by **garyb** » Sat Oct 15, 2005 10:43 pm

if asioscope is chosen in cubase and there are asio source and dest modules and sequencer midi source and destination modules are in the project BEFORE sx is opened it should work fine. the xtc error mentioned is easily eliminated by unchecking "activate xtc mode" in set/settings on the live bar.

Kidd · Post by **Kidd** » Tue Oct 18, 2005 11:36 am

All module's are set up correctly; however, I do know the problem is with the Asio, because when I try to set it up using the MME or Directx asio before opening cubase, it fails. As well, all other sequencer programs that I have work fine, it is only Cubase and Evolution, which both use ASIO that malfunction and do not open.

I am going to try messiah's method and reinstall everything hopefully that will work.

Herr Voigt · Post by **Herr Voigt** » Thu Oct 20, 2005 2:10 pm

During setting up my new system (built by AndreD - many thanks!!!) I had a similar problem, but it could be solved by reading another thread here.
After installing Cubase VST 5.1, I wanted to set up this ASIO thing, but it was not possible. Also, Cubase didn't start.
Solution: In your Scope project you must have wave source and wave dest, because Cubase requires these ports at first launching.
Now you can change the audio settings in Cubase from ASIO MME to ASIO Scope.
As I said, it is the solution with the good old Cubase VST 5.1. If you have the newer Cubase versions, I can't help.

Cheers, Thomas

Kidd · Post by **Kidd** » Thu Oct 20, 2005 9:55 pm

I did a complete re-format, and changed the placement of my scope board. Cubase is running fine. Thanks for all your help guys; It turn's out another software program that I had was interferring with cubase. Not sure which one it was yet, but as I re-install my software i'll find out and post it.

Me$$iah · Post by **Me$$iah** » Fri Oct 21, 2005 5:28 am

Glad to hear you got it working.

a pain tho, a complete reformat. Please do post what prog was interfereing tho, Im intersted to know

Messiah