I am selling my Scope Pro card 15 DSP (only the Scope, nothing else in my profile).
3 X ADAT I/O.
mix and master and synth and sampler packages,
bascially everything you get with the Scope Professional System.
I am based in London.
_________________
Asus PC-DL delux
Winxp Pro sp1
Nuendo 3
Scope 4.0
Gigastudio3
Native Instuments Komplete 2
2*xeon 3.06ghz
2gig ram
wd raptor 74gig system
wd raptor 74gig audio
Scope pro 15dsp Adat 24 I/O
uad-1
powercore ele
<font size=-1>[ This Message was edited by: tripstation on 2005-07-13 11:37 ]</font>
Scope Professional 15 DSP 24 ADAT I/O
-
MikeRaphone
- Posts: 181
- Joined: Mon Jul 21, 2003 4:00 pm
- Location: slovenia
Hey Trip, I was just curious how does Scope work with Raptors- these are the 10k rpm SATA discs, right?
I was thinking of getting them for my new setup, but there s supposed to be some trouble with SATA and PCI performance of the SCOPE card. Thx for info.
I was thinking of getting them for my new setup, but there s supposed to be some trouble with SATA and PCI performance of the SCOPE card. Thx for info.
May all sentient beings achieve liberation from suffering 
-
tripstation
- Posts: 176
- Joined: Tue Oct 12, 2004 4:00 pm
Hey MikeRaphone,
I use an Asus PC-DL Dual Xeon board.
The SATA on these motherboards has two cnannels that do not use the PCI bus at all. They are on the ICH5R south bridge chip.
I have no problems using it in XTC mode with Nuendo.
I can see how it may be a problem in Scope mode though.
Also I can't confirm it's performance if you have a motherboard that uses the SATA on the PCI bus,
regaards,
Tripstation.
I use an Asus PC-DL Dual Xeon board.
The SATA on these motherboards has two cnannels that do not use the PCI bus at all. They are on the ICH5R south bridge chip.
I have no problems using it in XTC mode with Nuendo.
I can see how it may be a problem in Scope mode though.
Also I can't confirm it's performance if you have a motherboard that uses the SATA on the PCI bus,
regaards,
Tripstation.
-
MikeRaphone
- Posts: 181
- Joined: Mon Jul 21, 2003 4:00 pm
- Location: slovenia
-
tripstation
- Posts: 176
- Joined: Tue Oct 12, 2004 4:00 pm
Hi Guys,
I have decided to keep my card.
I have just got the Minimax working in XTC mode and it sounds fantastic.
I am going to use the card without any I/O in an MLAN setup.
Can this be done with a 15DSP board?
regards,
Tripstation.
_________________
Asus PC-DL delux
Winxp Pro sp1
Nuendo 3
Scope 4.0
Gigastudio3
Native Instuments Komplete 2
2*xeon 3.06ghz
2gig ram
wd raptor 74gig system
wd raptor 74gig audio
Scope pro 15dsp Adat 24 I/O
uad-1
powercore ele
<font size=-1>[ This Message was edited by: tripstation on 2005-07-17 05:58 ]</font>
I have decided to keep my card.
I have just got the Minimax working in XTC mode and it sounds fantastic.
I am going to use the card without any I/O in an MLAN setup.
Can this be done with a 15DSP board?
regards,
Tripstation.
_________________
Asus PC-DL delux
Winxp Pro sp1
Nuendo 3
Scope 4.0
Gigastudio3
Native Instuments Komplete 2
2*xeon 3.06ghz
2gig ram
wd raptor 74gig system
wd raptor 74gig audio
Scope pro 15dsp Adat 24 I/O
uad-1
powercore ele
<font size=-1>[ This Message was edited by: tripstation on 2005-07-17 05:58 ]</font>