Having problems recording through the SPDIF connection on new Luna 2 card into tripleDAT.
Cable fine - I can record direct to tripleBoard no problem. Checked adapter cable and appears to be OK (actually tried 2 different adapters).
Sample rates seem fine throughout. Luna set to Slave mode.
All I get is crackling which seems to follow the audio to some degree. Any suggestions?
Thanks!!
Luna 2 and SPDIF
So just to clarify:
<li>tripleDAT is master in this case, Luna is slave.
<li>RCA-style SPDIF cable connecting the two
<li>Adapter on Luna2 is a Stereo 1/8" to Left RCA & Right RCA (tip[input] & ring[output]).
<li>SPDIF cable is connected to the "tip" RCA, for input.
tripleDAT is set to 44.1Khz, 16bit, Master.
Luna2 is set to 44.1Khz, Slave -- can you verify this using the Sample Rate settings dialog? You should see the red LED lit on the SPDIF connector (in this dialog box, its a 'virtual' LED.)
Did you make your adapter, or where did you get it?
_________________
<a href=http://infinitevortex.com>Infinite Vortex Audio</a>
<font size=-1>[ This Message was edited by: subhuman on 2001-09-07 11:09 ]</font>
<li>tripleDAT is master in this case, Luna is slave.
<li>RCA-style SPDIF cable connecting the two
<li>Adapter on Luna2 is a Stereo 1/8" to Left RCA & Right RCA (tip[input] & ring[output]).
<li>SPDIF cable is connected to the "tip" RCA, for input.
tripleDAT is set to 44.1Khz, 16bit, Master.
Luna2 is set to 44.1Khz, Slave -- can you verify this using the Sample Rate settings dialog? You should see the red LED lit on the SPDIF connector (in this dialog box, its a 'virtual' LED.)
Did you make your adapter, or where did you get it?
_________________
<a href=http://infinitevortex.com>Infinite Vortex Audio</a>
<font size=-1>[ This Message was edited by: subhuman on 2001-09-07 11:09 ]</font>
Oh lad, you are too cool. I love you and want to have your baby 
Sorry, I get carried away some times.
Anyway, your suggestion has me wondering. There isn't a specific reference within tripleDAT as a master or slave but there are a number of options/settings I may have missed. Still, since I am able to record direct to the tripleBoard into tripleDAT, wouldn't that seem to indicate that tripleDAT is already set as master?
I will take a closer look and let you know what I find out. If you have any other suggestions, please feel free to respond.
Thanks again!
PS: BTW: I already have a 3yo daughter so don't get any funny ideas!
Sorry, I get carried away some times.
Anyway, your suggestion has me wondering. There isn't a specific reference within tripleDAT as a master or slave but there are a number of options/settings I may have missed. Still, since I am able to record direct to the tripleBoard into tripleDAT, wouldn't that seem to indicate that tripleDAT is already set as master?
I will take a closer look and let you know what I find out. If you have any other suggestions, please feel free to respond.
Thanks again!
PS: BTW: I already have a 3yo daughter so don't get any funny ideas!
Well, I've exhausted every possible 3DAT/Luna setting there is and still no-go on this SPDIF problem. I'll make one last desperate plea for help before I once again turn to Creamware tech support.
Let me restate the problem:
Running a mic signal through a dbx 386 mic preamp with SPDIF output. Running the SPDIF cable directly input the tripleBoard soundcard and recording audio works just fine.
When I route the SPDIF cable to the Luna input and try recording into 3DAT, all I get is crackling noise which sounds faintly like it's following the audio signal. I have everything set to 44.1KHz and Luna is set to slave mode. I've tried 3DAT set to both slave & master and no difference.
Any suggestions would be very much welcome
Let me restate the problem:
Running a mic signal through a dbx 386 mic preamp with SPDIF output. Running the SPDIF cable directly input the tripleBoard soundcard and recording audio works just fine.
When I route the SPDIF cable to the Luna input and try recording into 3DAT, all I get is crackling noise which sounds faintly like it's following the audio signal. I have everything set to 44.1KHz and Luna is set to slave mode. I've tried 3DAT set to both slave & master and no difference.
Any suggestions would be very much welcome