Wanted: cable only for Pulsar1

abbyk · Post by **abbyk** » Sat Mar 20, 2004 10:54 pm

Hi all

Ok - So I've inherited a pulsar1 card, but WITHOUT a cable (cablewhip ?)

Anyone have one to sell or know where I can buy from ? ( Do I need to go direct to Creamware ?)

Thanks for any info - just dying to get this DAW setup & make tunes.

abbyk

Cesax · Post by **Cesax** » Sun Mar 21, 2004 11:56 am

Hi,what type do you need?

abbyk · Post by **abbyk** » Sun Mar 21, 2004 2:04 pm

Hi Cesax - thnks for the reply

Its the regular cable that comes with the pusar 1.
A 26-pin D-type connector (like a small parallel port) leading to :
4 Unbalanced analog RCA connectors (2 stereo inputs and 2 stereo outputs)
2 S/PDIF connectors (stereo in and stereo out via digital coaxial cable)
3 MIDI connectors (in/out/through)

The I/O cable in the second picture here :
http://www.lnlrecording.com/Pulsar.htm

Thanks - abbyk

Stubbe · Post by **Stubbe** » Mon Mar 22, 2004 3:59 pm

If you know which end of a soldering iron you're supposed to hold (or know somebody that does

), the complete electrical diagram for the whip is in the Creamware support database under Pulsar -> any OS -> hardware -> pin assignment of the cable whip (you'll need to login):

http://shop.creamware.de/shop2000/de/sh ... .asp?LG=US

Good luck
Stubbe

<font size=-1>[ This Message was edited by: Stubbe on 2004-03-22 16:01 ]</font>

abbyk · Post by **abbyk** » Mon Mar 22, 2004 4:35 pm

Thank you Stubbe

I was hoping not to go to those lenths - but hell if I cant source an original then I'll do it.

cheers abbyk

Cesax · Post by **Cesax** » Tue Mar 23, 2004 11:07 am

I've this cable new & never used because I've purchased Scope/SP 24 ADAT & into parcel I've found this cable(probably it's an error by the old user)
please contact me with a private message &.....cable is yours

Cesax · Post by **Cesax** » Thu Mar 25, 2004 6:44 am

Do you need the cable for classic plate?
let me know

abbyk · Post by **abbyk** » Thu Mar 25, 2004 1:17 pm

Hi Cesax

Thanks again

Been trying to find out the spec for "classic plate" - its difficult !

these 2 links show small pics only :
http://www.netzmarkt.de/thomann/thoiw9_ ... dinfo.html
http://www.dancetech.com/aa_dt_new/shop ... Dcreamware

It "seems" to be the SAME cable.

If you could just check for me that the D-adapter is 26 pins - then I'm pretty sure its the same.

That would be awesome

Sorry if this is touble for you - I just want to try & make pretty sure I will get a cable that works.

abbyk

Cesax · Post by **Cesax** » Thu Mar 25, 2004 2:04 pm

I?VE THE SAME CABLE TO SELL!!!!!!!!!!!

abbyk · Post by **abbyk** » Thu Mar 25, 2004 3:44 pm

Hi Cesax

I have PMed you

abbyk

Cesax · Post by **Cesax** » Sat Mar 27, 2004 9:58 am

Hi Abby,have you received my email?

abbyk · Post by **abbyk** » Wed Mar 31, 2004 9:51 pm

Have agreed to buy cable from Cesax - but am putting off until I recieve confirmation that it is indeed the correct cable.

New post here :
http://www.planetz.com/forums/viewtopic ... 35&forum=5

abbyk