PLEASE HELP ME !!! (Bigmixer problem)

Jngaelin · Post by **Jngaelin** » Sun Aug 11, 2002 10:20 am

Hi Pulsarians.

I really don't know when the problem occured.

My problem is that i can no longer see the "Bigmixer" surface.

I have the "Bigmixer" included in all of my projects...and in these old projects i am able to see the "Bigmixer" surface.

But recently when i tried loading the "Bigmixer" into a new project i discovered that i was unable to see it.

First i double klicked at the mixer...and nothing happens...
Then i tried right klicking on it and i tried to open it...nothing again...
When i right klick a second time...i three options...to open the "Bus" surface and i did..it worked...
To open the "Preset List" i did and it worked...
The Third Option was to CLOSE the "Bigmixer" suface but im still not able to see it !!!!!!!!!!

I've stayed up for 5 nights trying to fix it...but i don't know whats wrong with it...
I've never even got a error message..

My Pulsar software version is : Pulsar 3.0

And my platform :

COMPUTER
CPU : Celeron 800 MHZ (just temporary)
RAM : 512 MB
MOTHERBOARD : SynatiX 5EP i815P
SOUND BOARDS : Pulsar2 + Powersampler
Grafics Card : ATI-246VT3 RAGE 2 (PCI)
Screen setting : Resolution 1024*786 (just temporary)

Please help me....im getting crazy here...

I've also tried reinstalling the software.

I just can see why i can see the "Bigmixer" surface in my old projects and not now when atempting to make a new project ?????

<font size=-1>[ This Message was edited by: Jngaelin on 2002-08-11 11:22 ]</font>

borg · Post by **borg** » Sun Aug 11, 2002 2:38 pm

just a wild guess... but maybe your mixer is behind the routing window... try removing the routing window and you might find the BM.

algorhythm · Post by **algorhythm** » Sun Aug 11, 2002 2:44 pm

have you switched screen resoultions or disabled/added a second monitor? my guess is that is off screen . . .

I think I remember there being a screen bug w/3.0 . . . there was a patch @ creamware's site . . might as well go to SFP while yer at it

_________________
.: algorhythm :. http://www.algorhythmz.com
It is better to fail in originality, than to succeed in imitation.- Herman Melville

<font size=-1>[ This Message was edited by: algorhythm on 2002-08-11 15:45 ]</font>

Jngaelin · Post by **Jngaelin** » Mon Aug 12, 2002 10:38 am

A reply to Borg : Allready checked that...still nothing

Reply to algorythm : i think i know where the problem apears.

O've selected that Pulsar will be displayed in OS mode....in OS mode the bigmixer id not available visualy.
But if i display Pulsar in Pulsar mode...the Bigmixer is available visualy.

I still need to get this fixed... damn...

How ???

at0m · Post by **at0m** » Mon Aug 12, 2002 11:08 am

Did you try the BigMixer.dev is sent you? I never use the BM no more, but I loaded it here and it displayed normally.

subhuman · Post by **subhuman** » Mon Aug 12, 2002 11:43 am

Upgrade to SFP or use "Standard Mode" on the older versions.

zinzin · Post by **zinzin** » Fri Aug 16, 2002 7:23 am

Hi! I'm new here in this forum and i said a big hello at all members.
I've a problem with my Scope Fusion 3.1a and OMS 2.3.8. When i create a New Setup Studio, OMS can't load the Creamware OMS driver (error-1).Please, if you have the solution, help me.
Thanks.
P.S: I don't speak (or write here) well English so I hope you understand me, and sorry for mistakes.

ernest@303.nu · Post by **ernest@303.nu** » Fri Aug 16, 2002 9:07 am

zinzin: I recommend that you create a new seperate topic for your question; 100x better chance for an answer

Jngaelin · Post by **Jngaelin** » Sat Aug 17, 2002 5:43 pm

I agree