-sold- 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 C

Have Scope hardware to sell or trade? NO DEALER POSTING ALLOWED.

Moderators: valis, garyb

Post Reply
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

-sold- 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 C

Post by widy »

I was a scope user since years and realy happy with it. Since i switched to a new Computer
it's not possible to install them again and finally i also needed more I/O's and i switched to a MADI solution
So here are my setup to sell

1 x 14/15 DSP Sound Card Creamware Scope Z-Link Version
2 x Z-Link Cable
--------------
2 x Creamware Luna Sound Card* each with 2 Midi Cables
--------------
2 x Luna 2496 24Bit/96KHz Convertion Unit 8 analog I/O via Z-link

Note:
*I trade the two Luna Sound Card as defect
I only bought them together with the Luna 2496 Convertion Unit, and i linked those
directly to the Creamware Scope. I never turned the 2 Luna Cards on. So i can not realy say
that they are working or not. Since i switched my PC and did not own any PCI slot anymore i can
try out those to be 100% sure that they are working fine.

Software Creamware Scope (GL9....05):
SCOPE 5.1 registerd to Creamware Scope an all Plugins registered to those Card ( see pic below )
Current Software 5.1 and Key File via USB Stick ( did not own a CD )
+SC SCOPE v5.1 Application
+Mixer Package 2=
+SCOPE v5 Application
+SC Basics
+SC Effects
+SC Mixers
+SC Synths
+SC Samplers
+SC Samplers (STS5000)=
+SC LX Reverbs
+Modular v2 / Elektra
+SC Modular v2
+Modular v3
+SC Modular v3
+Volkszampler
+SC OptiMaster
+SC PSY Q
+SC SB 404
+SC Minimax
+SC Vectron
+SC Vocodizer
+SC Vinco
+SC B-2003
+SC Prodyssey
+SC Profit 5
+SC Interpole
+SC VDAT=
+VDAT=
+SPL Attacker
+FleXor

Software: Luna Card 1 (X51...G05):
Label on Luna Card: Home v4.5 19.12.06
Manaal Contains a sticker with keys for:
Manual Shows a labled with Keys for
Scope Fusion Platform 4.0
Mixer Package I
Mixer Package II
Effect Package I
STS 4000
Synthesizer Pkg I
Synthesizer Pkg II
SB404
EDS 16i
Poison
MultiClip
I did not own those Software and a CD ( needs to be downloaded )

Software: Luna Card Y0R...T0X
Luna II 20.01.03
Manual Contains a sticker with keys for:
Scope fusion Platform
Main Studio Tools Pkg
Luna V3 Software
I did not own those Software and a CD ( needs to be downloaded )

My Sonic Core / Creamware was running for years without any problems
Scopy Scope connected to 2 Luna Converters via Z-Link and a link via ADAT to a Behringer AD/DA Converter
The only reason to sell those cards was a switch to a new PC without any PCI slot
And dealing with converters from PCIE-PCI was no option for me because i also needed extra I/O too

I wish to sell all in one shot, but also parts are possible
If one gets a Luna Card and later on she/he found out its not working she/he will get the money back for sure
Because i realy have no change to try them out any more

I realy have no idear what's the current price for such a setup .. maybe someone can give me a hint
best regards Martin
Last edited by widy on Fri Jan 15, 2016 2:19 pm, edited 1 time in total.
lg widy
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

will put this on ebay on weekend
last change to get it here for cheap ...just make me an offer
best regards Martin
lg widy
Eanna
Posts: 615
Joined: Fri Dec 02, 2011 1:57 am
Location: Ireland

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by Eanna »

Hi, do you know, is it a Gen2 Scope card?
Not because it is easy, but because it is hard...
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

is itwritten on the card .. if yes i will take a look
lg widy
User avatar
tlaskows
Posts: 1512
Joined: Fri May 20, 2005 4:00 pm
Location: Ontario, Canada
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by tlaskows »

If it has a detachable plate, it's most likely gen 2. I think?

cheers,

-Tom
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

ok it seems its gen2 ..it looks like that the plate is removable
pics are here
Attachments
luna home v4.5 19.12.06
luna home v4.5 19.12.06
s_Luna Home v4.5 19.12.06.jpg (145.29 KiB) Viewed 4847 times
scope from the side
scope from the side
s_creamware scope 2.jpg (95.05 KiB) Viewed 4847 times
creamware scope
creamware scope
s_creamware scope 1.jpg (155.28 KiB) Viewed 4847 times
lg widy
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

and 2 pics more
Attachments
last run ~10.12.2015
last run ~10.12.2015
s_load and version.jpg (98.62 KiB) Viewed 4847 times
luna II 20.01.03
luna II 20.01.03
s_Luna II 20.01.03.jpg (152.02 KiB) Viewed 4847 times
lg widy
User avatar
tlaskows
Posts: 1512
Joined: Fri May 20, 2005 4:00 pm
Location: Ontario, Canada
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by tlaskows »

Hmm,

I couldn't find anything on the 15 DSP cards 1st gen. Is there such a thing?

There is a sticker with a S/N and a date on it on every card.

-Tom
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

sticker says:
Scope SN: GL9M6X205
Power Pulsar PD:13.11.03

and it looks like that the plate is removable .. the is a socket and screws
best regards martin
lg widy
User avatar
tlaskows
Posts: 1512
Joined: Fri May 20, 2005 4:00 pm
Location: Ontario, Canada
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by tlaskows »

Yes, 2003 is gen2. I have 2x 2003 and one 2006 I think...

-Tom
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

nevertheless what is the current price of dealing such stuff
-luna converter and
-sconic scope with current software

best regards martin
lg widy
zerocrossing
Posts: 213
Joined: Tue Oct 13, 2015 6:26 am

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by zerocrossing »

Would the Luna 2496s work as i/o for an XITE-1? If so, I may be interested. (Why RCA inputs though? :-? )
User avatar
tlaskows
Posts: 1512
Joined: Fri May 20, 2005 4:00 pm
Location: Ontario, Canada
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by tlaskows »

Well, the software is really worth more than the hardware...

I tried to sell my 45 DSP system for around $2000, no bites.

600$ for 1 card. nothing.

Someone offered me 300$ for one of my cards :o

Told them to go buy Xite1-d
User avatar
widy
Posts: 175
Joined: Wed Apr 07, 2004 4:00 pm
Location: Austria-Graz
Contact:

Re: 1xcreamware scope Z-ink 5.1, 2xluna , 2xLuna 2496 Conver

Post by widy »

i guess the luna is not compatible to the exite ..also the old a16 is not compatibel i guess

btw its already sold
so this topic is closed

widy
lg widy
Post Reply