Missing ADAT inputs after adding extra pulsar card ....

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
User avatar
Shamk
Posts: 66
Joined: Tue May 14, 2013 10:56 pm
Location: Toulouse, France
Contact:

Missing ADAT inputs after adding extra pulsar card ....

Post by Shamk »

Hi everyone,

I just added an extra pulsar card but only one ADAT input is present on the list, is there a limitation of ADAT inputs or is it a real problem ? :(

Image
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
borg
Posts: 1517
Joined: Tue Oct 23, 2001 4:00 pm
Location: antwerp, belgium

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by borg »

edit:
my mistake, was looking in the wrong place...

no limit, so a problem... try reseating the card, blowing the adat ports with compressed air...
andy
the lunatics are in the hall
User avatar
garyb
Moderator
Posts: 23377
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by garyb »

is that a Pulsar1?

if so, i believe only one 16channel ADAT module is used. if the module is an 8 channel one and there is no ADATb, then the card is probably damaged.
User avatar
Shamk
Posts: 66
Joined: Tue May 14, 2013 10:56 pm
Location: Toulouse, France
Contact:

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by Shamk »

Yes, that's a pulsar I and there is no adat module used on this card ...

I'm gonna try to reseating the card but i'm not shure it's gonna solve the problem. :(
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
User avatar
Shamk
Posts: 66
Joined: Tue May 14, 2013 10:56 pm
Location: Toulouse, France
Contact:

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by Shamk »

Such a nOOb ! i didn't remember it was one adat module on pulsar I.... :(

Image
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
User avatar
garyb
Moderator
Posts: 23377
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by garyb »

yes, one 16 channel ADAT module. :D
borg
Posts: 1517
Joined: Tue Oct 23, 2001 4:00 pm
Location: antwerp, belgium

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by borg »

what do ya know? guru gary! :) had a pulsar I ages ago, couldn't remember... sorry for the misinformation.
andy
the lunatics are in the hall
User avatar
Shamk
Posts: 66
Joined: Tue May 14, 2013 10:56 pm
Location: Toulouse, France
Contact:

Re: Missing ADAT inputs after adding extra pulsar card ....

Post by Shamk »

Thank you all ! :D
Creamware Scope 5.1 (Scope Power Pulsar 1.01|3 x Pulsar II|Pulsar I|Syncplate), scope abuser since 2004.
Asus Z87-K C2|Intel Haswell Core i7-4770|Kingston KHX1600C9D3K2/8GX - 2 x 4 Gb Ram (1600 MHz)
13 MV @ Masterverb Test
Post Reply