Looking for a STDM-cable and an analogue cablewhip

[ensoniqeps]

Hi fellow musicians and producers!

I would need to buy a STDM-cable and also an analogue cablewhip.
I reside in Sweden.

Please drop a note so we can discuss prices!

[ensoniqeps]

To be more specific:

the STDM-cable is for connecting a 15 DSP-card with a 6 DSP-card.
I reckon there is only one type of STDM-cable?

The whip is for the 15 DSP-card. It has:
3 MIDI-connectors (In, out and through).
2 digital SPDIF digital connectors (In and out)
2 analogue RCA Ins
2 analogue RCA Outs

[garyb]

an s/tdm cable is easy.

S|C can sell you one or you can make one yourself as this article shows:
http://www.hitfoundry.com/issue_10/stm_mast.htm

for the cable whip, you're in trouble. those are no longer manufactured. it's possible to make on and S|C may have the pinout schematic. S|C may also have a used one if you're very lucky. it'll be expensive.

[thehe]

an s/tdm cable is easy.

S|C can sell you one or you can make one yourself as this article shows:
http://www.hitfoundry.com/issue_10/stm_mast.htm

for the cable whip, you're in trouble. those are no longer manufactured. it's possible to make on and S|C may have the pinout schematic. S|C may also have a used one if you're very lucky. it'll be expensive.

SC wants 19,90euro plus shipping...
Maybe i build & can sell some a little bit cheaper - i ordered stuff from USA for that -- i'll give you a quote when all arives

[ensoniqeps]

OK!

Thank you!

I have a Focusrite with 8 ins and outs (ADAT), but I also use the cablewhip when i'm just using Windows and not doing music.