pulsar 2 and Giga
pulsar 2 and Giga
Ever since I upgraded Giga from 2.5 to 3.0, my sound scope/pulsar multichannel driver -- sound card is no longer recognized. I talked to Tascam and they sent me to creamware, and creamware sent me to tascam. Are their any current drivers specifically for the audio card -- I am running 1.70 as far as Giga tells me. Suggestions on how to get Giga ro recognize the card again?
-
synthetic88
- Posts: 134
- Joined: Fri Apr 06, 2007 9:48 am
-
synthetic88
- Posts: 134
- Joined: Fri Apr 06, 2007 9:48 am
Well, there you go.
The secret with the Scope stuff seems to be add a driver for every I/O you MIGHT use and save that as your default. Then, when you launch some other software it won't be lookin for what ain't there.
You should also consider sidegrading to GVI. It pretty well smokes GS3 anymore and costs about 8 lattes. Plus you can route it through Plogue Bidule and load other VSTIs for added fun.
The secret with the Scope stuff seems to be add a driver for every I/O you MIGHT use and save that as your default. Then, when you launch some other software it won't be lookin for what ain't there.
You should also consider sidegrading to GVI. It pretty well smokes GS3 anymore and costs about 8 lattes. Plus you can route it through Plogue Bidule and load other VSTIs for added fun.
well, it's pretty easy to load the driver when you need it so it doesn't take dsp when you're not using it. if the driver's not in the routing window when the app opens, the app can't see it is all.
yes, GVI is a very nice product for that money. it works very well with wav drivers in stand alone and perfectly with bidule and asio drivers.
yes, GVI is a very nice product for that money. it works very well with wav drivers in stand alone and perfectly with bidule and asio drivers.
PM me if you have troubles w/ the enable / disable ins and outs of the GS3 connection window.
And by all means ignore the pop up window that says do you want to go to diagnostic mode.
But do yourself a favor, and upgrade to GVI immediately. Use any host you want pretty much, but you will see that GVI is the shit now, that is until GS4 comes out and Sonicore makes us new drivers for the ultimate DAW.
But I am not holding my breath on that courtesy.
And by all means ignore the pop up window that says do you want to go to diagnostic mode.
But do yourself a favor, and upgrade to GVI immediately. Use any host you want pretty much, but you will see that GVI is the shit now, that is until GS4 comes out and Sonicore makes us new drivers for the ultimate DAW.
But I am not holding my breath on that courtesy.
of course giga doesn't see any IOs - how should Tascam even know about it ? 
you add the IOs in Scope's routing window, but afaik with the current version of gsif only output works, i.e. you cannot connect an analog input or a few channels from an adat converter to gsif to sample 'live', which the '2nd generation' gsif implementation would allow.
You probably have connected the gsif outputs to a mixer (or to asio channels) before - with the gsif module that comes with Scope - the input part simply doesn't exist yet.
cheers, Tom
you add the IOs in Scope's routing window, but afaik with the current version of gsif only output works, i.e. you cannot connect an analog input or a few channels from an adat converter to gsif to sample 'live', which the '2nd generation' gsif implementation would allow.
You probably have connected the gsif outputs to a mixer (or to asio channels) before - with the gsif module that comes with Scope - the input part simply doesn't exist yet.
cheers, Tom
