Here it is:gainman wrote: I have found a few of these fine insert devices, but I was unable to find the 2 mono channel insert .
Could someone post a link?
.
That would be a great addition! In my opinion, just a red overload-led next to every insert slot would be absolutely fine. Just make sure that the red led stays lit for 5-10 seconds or more, so one can easily find out where the clipping comes from.erminardi wrote:Any suggestion for Se-70 improvement is welcome.
I was tinking about a VU meter for every insert slot output because some basic plugs lacks of volume monitoring (it's easy, in this way, to achieve clipping along the array and it's hard to find where...).
But I actually don't know how to make the switching interface for every pressed button. Maybe is enough a red overload-led near every insert slot...
.. When I load it, I get no sound coming out at all! When I bypass it, only the right speaker plays! 
Clever, but I'm new to SDK and I must learn about how to make a correct send/return circuit.gainman wrote:Hey, another suggestion I thought of:
The ability to have a few effects loops that can be placed anywhere in the insert chain, so that external effects (e.g. real stompboxes) can be integrated.
E.g. one could setup a chain as follows:
1- Gate/expander
2- eq
3- external wah
4- external dirtbox
5- dt
6- eq
7- compression
8- delay
9- reverb
I think that would make for the ultimate guitar rack!
Same problem... I must learn ho to make a sat led.That would be a great addition! In my opinion, just a red overload-led next to every insert slot would be absolutely fine. Just make sure that the red led stays lit for 5-10 seconds or more, so one can easily find out where the clipping comes from.
Uh, no problem here with Scope 4.5 and 2 different system.rodos1979 wrote:P.S. I think the new device is WAY more problematic than the last one.
Indeed...erminardi wrote:In the old version of SE-70 I've found the problem that if U put a stereo FX (i.e. stereo panner) and then another stero FX (i.e. reverb), the stereo panner signal becomes mono
Well, don't worry, you are doing fine already!erminardi wrote:Same problem... I must learn ho to make a sat led.
There is any SDK guru that can help me?
Thanks in advance!
Anyway I will continue to learn with my mistakes
This device is really helpful and clever! It would be good though if someone that knows the SDK better could help you to perfect the device. What Dynatube lacks in comparison to GuitarRig and Amplitube are the presets. With your device, we could all build a great preset list that could help Dynatube guitar sounds to shine in comparison to the other two amp sims..Scope 4.0 here... I try it and post back right away...erminardi wrote:Uh, no problem here with Scope 4.5 and 2 different system.rodos1979 wrote:P.S. I think the new device is WAY more problematic than the last one.
Try to close & reopen your Scope...
Let me know if U still obtain this issue.
1) I think that using insert bay in a insert of mixer is a dangerous thing, too many inserts into insert!!! Strange and unpredictable behavior, sometimes works and sometimes don't works. Use it outside the mixer just like an external FX, until I can fix (I hope) this problem...rodos1979 wrote:Ok... I did test and found the following results:
1) If you use your device in an insert slot of a mixer, then what I said above happens.. The previous version was working fine in that respect
2) If you use it as a device in the scope routing window then it seems to work BUT there still exists this problem: "..if U put a stereo FX (i.e. stereo panner) and then another stero FX (i.e. reverb), the stereo panner signal becomes mono"
3) In the previous version.. if you feed a stereo signal into the device (at least when it is loaded in a mixer insert slot) and you push any stereo button, the sound become instantly mono...
I hope this helps...
Yes, sure you can! I ve just tried it with my TC G-Major which is connected to the SPDIF.gainman wrote:Is that possible? I mean, have you actually used an external effect module as an insert?cant someone achieve the same result using the "External Effect" module on an insert?...
I don't have SFP here , so I can't try it now, but I thought that only devices could be used in inserts.
Your first version of the device didn't have this problem though.. I can load many instances of MultiFX, one in to the other, and there is no problem..- the muting issue when dev is used as insert into the Scope Mixer is still present, I can't relly understand why this random bug... damn SDK!
For shure because too much "insert into insert into insert"... sorry, just use it outside the mixer.
- If U accidentally click on the led and it becomes red... just re-click over itrodos1979 wrote:OK, it seems I am the only beta-tester of the device...
The Leds are a great addition! But I have found that if you accidentally click on a LED then it takes 30sec until the LED starts to work normally again. Of course this is not a show-stopper! Just don't click the LEDs!Your first version of the device didn't have this problem though.. I can load many instances of MultiFX, one in to the other, and there is no problem..- the muting issue when dev is used as insert into the Scope Mixer is still present, I can't relly understand why this random bug... damn SDK!
For shure because too much "insert into insert into insert"... sorry, just use it outside the mixer.
... As the device turns out to be, with the mono chain in the beginning and the stereo chain after the Pitch shifter, I cant understand what is the purpose of the Stereo button..
I just came home from work and I had this idea: make the whole circuit in stereo! .. Ok, now you are going to ask me but what about Dynatube that is available in mono only?... If you make the whole circuit in stereo, then there are two possibilities:erminardi wrote: - If U accidentally click on the led and it becomes red... just re-click over it
- SDK seems to be incontrollable, sometimes appeares strange issues!!!
I really haven't done any great change in the circuit from first to others version. Maybe is the preset handling?! Who knows?
- the stereo button allows to load stereo plugins (keep in mind that not all 3d part plugs are available in mono version!) even if the usage is not true stereo but double mono.
All these problems with stereo/mono insert are gone out because Dynatube is not available as stereo device!!!
If I will build the circuit only in stereo, I can't load Dynatube.
If I will build the circuit only in mono, I can't load Stereo plugs.
The solution is a hybrid because the mentioned issue about stereo after stereo insert kills the first stereo signal!
