STILL SYNC PROBLEM WITH XP AND CUBASE

mode · Post by **mode** » Sun Sep 17, 2006 5:49 am

HI SORRY IN ADVANCE FOR BAD SPELLING
IVE SEEN ALL THE POSTS ABOUT SYNC AND MIDI TIME PROBS STILL I CANT FIX IT.

I HAVE A MAJOR PROBLEM WITH PULSAR SYNC INTO NUENDOCUBASE ITS A LATENCY AND INSTABLITY ABOUT 100-200 MS , WHEN IM RECORDING PLUSAR SYNTH AND MOD INTO NUENDO,IVE DONE ALL THINGS RECOMENDED IN STIENBERG KNOWLEGEBASE STILL NADA ---MY PC IS P4GIGABYTE BORD AND 2.8GH INTEL PROCESSOR/
DRIVER IS SET INTO NUENDO-ASIO SCOPE -SYNC TO CW HARDWHERE ,I SET MY PROCESSOR TIMEING
TO BACKROUND SERVISES HAVE DX9.0C REMOVED EXLREATION IN DXDIAG,WHAT ELS IVE DONE A TEST WITH MIDI TIME IT SAYS THAT I HAVE TO CLOCKS SOMIN LIKE THAT AND ,ALSO FIXED MY ONBORD SB TO USE DEFUALT , IM A NEW USER PLEASE SOME 1 HELP ME
IVE ALSO SET THE ASIO MULTIMEDIA AND DUPLEX SYNC AND BUFFER IS OK ,I USE CREAMWARE MIDI 12 NON EMULEDET - DID IT BOTH WAYS - EMULADET WITH SYSTEM TIMESTAMP DOSENT MAKE A SOUND DID MORE DIGGING ALL OVER THE PLACE
MABY SOME REMOTE HELP BY MSN WILL B EXELENT
IF SOME 1 WILL FIX IM WILLING TO PAY FOR HIS TIME,WHEN I RECORD I HAVE MSN TURED OFF,DID ALL KIND OF ****
DID I MISS SOMIN -TELL ME A

Post by **hubird** » Sun Sep 17, 2006 6:26 am

Post by **garyb** » Sun Sep 17, 2006 10:02 am

please turn off your caps. it's like you are shouting.

you should use the asioscope driver in cubase. make sure you do not have any cracked software. also, don't get rid of directx on your machine!

mode · Post by **mode** » Sun Sep 17, 2006 11:19 am

i do use asioscope as my main driver in cubase it is set for sure "ASIO DRIVER NAME ASIO SCOPE" i still got my direct x just removed the exelreation on it (with or without still no good

Post by **garyb** » Sun Sep 17, 2006 4:15 pm

you tried this?
http://www.planetz.com/forums/viewtopic ... &forum=1&8

mode · Post by **mode** » Sun Sep 17, 2006 11:47 pm

ya dude i have nothing share my pulsar

éöéàú ÷ìè/ôìè 0x00000000-0x0000047F PCI bus
éöéàú ÷ìè/ôìè 0x00000000-0x0000047F á÷ø âéùä éùéøä ìæéëøåï

éöéàú ÷ìè/ôìè 0x000003C0-0x000003DF SiS Accelerated Graphics Port
éöéàú ÷ìè/ôìè 0x000003C0-0x000003DF NVIDIA GeForce FX 5700LE

ëúåáú æéëøåï 0xD0000000-0xDFFFFFFF SiS Accelerated Graphics Port
ëúåáú æéëøåï 0xD0000000-0xDFFFFFFF NVIDIA GeForce FX 5700LE

ëúåáú æéëøåï 0xE4000000-0xE5FFFFFF SiS Accelerated Graphics Port
ëúåáú æéëøåï 0xE4000000-0xE5FFFFFF NVIDIA GeForce FX 5700LE

ëúåáú æéëøåï 0xA0000-0xBFFFF PCI bus
ëúåáú æéëøåï 0xA0000-0xBFFFF SiS Accelerated Graphics Port
ëúåáú æéëøåï 0xA0000-0xBFFFF NVIDIA GeForce FX 5700LE

éöéàú ÷ìè/ôìè 0x000003B0-0x000003BB SiS Accelerated Graphics Port
éöéàú ÷ìè/ôìè 0x000003B0-0x000003BB NVIDIA GeForce FX 5700LE

sorry its not in english hope u can get the point

IRQþ 0 ùòåï òöø ùì äîòøëú OK
IRQþ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQþ 3 éöéàú ú÷ùåøúþ (COM2) OK
IRQþ 4 éöéàú ú÷ùåøúþ (COM1) OK
IRQþ 6 á÷ø ú÷ìéèåðéí ú÷ðé OK
IRQþ 8 ùòåï æîï àîú/CMOS ùì äîòøëú OK
IRQþ 9 Microsoft ACPI-Compliant System OK
IRQþ 10 MPU-401 Compatible MIDI Device OK
IRQþ 12 PS/2 Compatible Mouse OK
IRQþ 13 îòáã ðúåðéí ðåîøé OK
IRQþ 14 Primary IDE Channel OK
IRQþ 15 Secondary IDE Channel OK
IRQþ 16 NVIDIA GeForce FX 5700LE OK
IRQþ 18 Realtek AC'97 Audio OK
IRQþ 19 Creamware Pulsar2 OK
IRQþ 20 SiS 7001 PCI to USB Open Host Controller OK
IRQþ 21 SiS 7001 PCI to USB Open Host Controller OK
IRQþ 23 SiS PCI to USB Enhanced Host Controller OK

i did checked the time system box with or with out same problem - say is there a way that u will have a quick look at my pc,maby by remote help cos im about to loose all hope ,maby i missed a small thing and u will notice (im willing to pay maby by paypal or somin,just got to fix it)tnx

Post by **garyb** » Mon Sep 18, 2006 12:22 am

maybe something like that can happen...

what does the onboard sound have to do with the setup? the two clocks thing is interesting. asio multimedia and buffer settings would have nothing to do with cubase set up for asio scope....

<font size=-1>[ This Message was edited by: garyb on 2006-09-18 01:26 ]</font>

valis · Post by **valis** » Mon Sep 18, 2006 12:36 am

What version of nuendo?

mode · Post by **mode** » Mon Sep 18, 2006 3:36 am

my nuendo ver - 3.02

btw i know that multimedia setup got nothing to do with it but i just tought about giving it a go dident help
maby ive missed somin small and havent notice to it,some msn remote help would b great or any other info (im just dieing to record the modular)

fidox · Post by **fidox** » Mon Sep 18, 2006 4:47 am

huh, SIS chipset ?

Intel chipset much better choice,
particularly for audio purpose

<font size=-1>[ This Message was edited by: fidox on 2006-09-18 05:48 ]</font>

Nebukadneser · Post by **Nebukadneser** » Mon Sep 18, 2006 5:49 am

To make MIDI work in sync and w/out latency, I suggest 2 things:

ASIO Driver: Do not use any other driver than SCOPE ASIO.

Midi: Try to find and "use system timestamp" in one of the drop down menus in Nuendo. (Devices --> Setup, or similar)

Nuendo - If you are a beginner, as you say, why start with Nuendo? Go for something simpler and cheaper such as Cubase SE. It works wery well for a beginner.

Neb

mode · Post by **mode** » Mon Sep 18, 2006 6:17 am

*should i try to use the emuladet creamware midi port??
*ive notice that i havent tried my emulated midi ins the right way - do i have to change the defult midi device in dirctx into creamwaremidi(emulated)??and i did try to.. but i cant change them(just by pressing on the columns on the right side)btw - i got sx cos of a good frainds advice.is cubase less problematic?
***and when i try to use activat the emulated ports in - device setup i can activate just the ins no the outs --creamware midi inout1 not active how come
and is that situation when i moving the file back the his orignal folder,there is NO emulated drivers in -devicesetup-midi direct music

mode · Post by **mode** » Mon Sep 18, 2006 6:21 am

*** ps in direct music settings the defult midi port is ---microsoft synthesizer -is that got somin to do with it??

braincell · Post by **braincell** » Mon Sep 18, 2006 7:29 am

No, and you should never use emulated ports.

Post by **garyb** » Mon Sep 18, 2006 8:02 am

the sis chipset on that motherboard is a major potential trouble source..

valis · Post by **valis** » Mon Sep 18, 2006 7:30 pm

It probably isn't the culprit for his latency issues though. Emulated ports are a bigger possibility there. The SiS chipset will perhaps reveal further issues once you works out this particular problem though...

Post by **garyb** » Mon Sep 18, 2006 8:24 pm