Upgrade your Pulsar II /PowerPulsar to v4.5 before X-Mas and

Planet Z Announcements

Moderators: valis, garyb

User avatar
paulrmartin
Posts: 2445
Joined: Sun May 20, 2001 4:00 pm
Location: Montreal, Canada

Post by paulrmartin »

Yeah! Is it possible to get both S&S and M&M packs?

Trying to call Germany now but the phone hangs up... Maybe I'm too early :smile:
Are we listening?..
spoimala
Posts: 754
Joined: Thu Aug 29, 2002 4:00 pm
Location: Finland
Contact:

Post by spoimala »

Can I upgrade the same card twice? =P =P =P
No you can't. I can't even upgrade once as the system complains it has been already upgraded (which it is not).
ChampionSound
Posts: 334
Joined: Thu Sep 23, 2004 4:00 pm
Location: Netherlands

Post by ChampionSound »

Whoa! Can you imagine that, S&S and M&M together for 2 x 98 eur :eek:

That's too good to be true for sure... :smile:
Music Manic
Posts: 1743
Joined: Wed May 15, 2002 4:00 pm
Contact:

Post by Music Manic »

Woohoo! just got upgrades from Ralf.
Got all knew bits.
Got both packs.One for each card.

Now this is a deal.

Thanks
User avatar
paulrmartin
Posts: 2445
Joined: Sun May 20, 2001 4:00 pm
Location: Montreal, Canada

Post by paulrmartin »

Did you have to do a full re-install once you got the packs?

When I installed on top of the old one Scope doesn't open and I checked my CPU usage and it's at 100%.
MD69
Posts: 619
Joined: Mon Nov 07, 2005 4:00 pm
Location: France

Post by MD69 »

Hi,

I installed the new devices without installing 4.5. I copied the dsp folder from the 4.5 distrib over the old 4.0 but didn't replace the old dsp files (to have the new ones only) and then installed the new devices oxe (I had to install manually the ones without oxe as SBC, ...). Seems to work correctly as I don't have problem here.
Kymeia
Posts: 492
Joined: Sun May 02, 2004 4:00 pm

Post by Kymeia »

OK - I have a Pulsar 2 and have just upgraded to 4.5 but have not recieved anything about getting my choice of packs. I already own the S&S pack so naturally I would choose the M&M one but because I have one does it mean I don't qualify?
symbiote
Posts: 781
Joined: Sat May 01, 2004 4:00 pm

Post by symbiote »

I just did a re-install. Changed the name of my SFP4 directory, installed 4.5 where 4.0 used to be, copied over the extra devices from my SFP4 did, spent a few minutes configuring ULLI/directories/etc, and I was back into fully-functional land.

BTW the trick to upgrade and get the S&S or M&M pack is to pick the Scope Project upgrade (with the pack you want,) and provide your Pulsar2 or PowerPulsar serial number. 'Tis what I did, and I received all my keys automagically.

If you didn't get them, you will have to email them. Might take a few days to answer given that they are probably a bit swamped right now =P

BTW I noticed a couple of bugfixes in 4.5 vs 4.0, like saving project to a new name won't assign that new name as the project title (i.e. project title stays static in 4.5, while in 4.0 it changed to the new filename.) No real showstopper, but there's definitely a few fixes.
roberflas
Posts: 72
Joined: Sat Dec 13, 2003 4:00 pm
Location: España

Post by roberflas »

thank you creamware, this is a great gift for all of us
samplaire
Posts: 2464
Joined: Tue Jun 05, 2001 4:00 pm
Location: Warsaw to Szczecin, Poland
Contact:

Post by samplaire »

On 2005-12-15 08:35, MD69 wrote:
Hi,

I installed the new devices without installing 4.5. I copied the dsp folder from the 4.5 distrib over the old 4.0 but didn't replace the old dsp files (to have the new ones only) and then installed the new devices oxe (I had to install manually the ones without oxe as SBC, ...).
Oxe installs all required DSP files, too so it was not necassary to copy them manualy :smile:
qAPLAh
Posts: 20
Joined: Tue Sep 09, 2003 4:00 pm
Location: Amsterdam, The Netherlands

Post by qAPLAh »

Hi all,

I own 2 x Pulsar2 and a SRB. They're sitting in 1 computer. Now i'm completely confused regarding the Xmas-'upgrade' (which one should i choose?) and what's more, i don't own a creditcard to purchase it. It seems that's the ONLY way to buy it?
Would really like to have the Minimax and Vectron....

<font size=-1>[ This Message was edited by: qAPLAh on 2005-12-16 03:42 ]</font>
Music Manic
Posts: 1743
Joined: Wed May 15, 2002 4:00 pm
Contact:

Post by Music Manic »

http://www.creamware.com/

Look at effect and synth higlights on left and these show MnM and SnS stuff when you upgrade.Get full key from Ralf after upgrading:

rb@creamware.de
qAPLAh
Posts: 20
Joined: Tue Sep 09, 2003 4:00 pm
Location: Amsterdam, The Netherlands

Post by qAPLAh »

But what about the creditcard issue?
virtualstudio
Posts: 451
Joined: Tue Jun 11, 2002 4:00 pm
Location: Terranova-Amsterdam

Post by virtualstudio »

On 2005-12-15 13:59, Kymeia wrote:
OK - I have a Pulsar 2 and have just upgraded to 4.5 but have not recieved anything about getting my choice of packs. I already own the S&S pack so naturally I would choose the M&M one but because I have one does it mean I don't qualify?
You made your choise at the ordering page!yes you should qualify.
if something went wrong there I would email Ralf
MaoMusique
Posts: 74
Joined: Thu Mar 04, 2004 4:00 pm
Location: AlphaCentaurus
Contact:

Post by MaoMusique »

Thanks, it's ok for me.

@+
ScofieldKid
Posts: 307
Joined: Thu Nov 13, 2003 4:00 pm
Location: Oregon
Contact:

Post by ScofieldKid »

Yeah, this is a bit confusing. I think that Creamware probably intended to have people do:

PulsarII w/none -> Pulsar II w/ v4.5 SS
PulsarII w/SS -> Pulsar II w/ v4.5 SS
PulsarII w/MM -> Pulsar II w/ v4.5 MM

If they were doing an "Add Pack Offer", then they probably should have made it a separate thing. If they meant any of the three or six possibilities of getting to both packages by doing two upgrades:

Pulsar II w/SS -> Pulsar II w/ v4.5 SS + MM
or
Pulsar II w/ v4.5 SS -> Pulsar II w/ v4.5 SS + MM

that would probably need to be confirmed by the Creamware guys.
ali
Posts: 275
Joined: Sun Feb 15, 2004 4:00 pm

Post by ali »

ScofieldKid

your explanation is correct.


<font size=-1>[ This Message was edited by: ali on 2005-12-16 11:26 ]</font>
ScofieldKid
Posts: 307
Joined: Thu Nov 13, 2003 4:00 pm
Location: Oregon
Contact:

Post by ScofieldKid »

Thanks for clearing that up. It's still a good deal. Thanks again to Creamware.
Kymeia
Posts: 492
Joined: Sun May 02, 2004 4:00 pm

Post by Kymeia »

On 2005-12-16 04:18, virtualstudio wrote:
On 2005-12-15 13:59, Kymeia wrote:
OK - I have a Pulsar 2 and have just upgraded to 4.5 but have not recieved anything about getting my choice of packs. I already own the S&S pack so naturally I would choose the M&M one but because I have one does it mean I don't qualify?
You made your choise at the ordering page!yes you should qualify.
if something went wrong there I would email Ralf
Well I emailed yesterday but not had a response yet. I upgraded a few days ago before I saw this thread so I upgraded what I own - which is Project. But from what it says in the OP I think I should qualify.
chippie
Posts: 34
Joined: Mon Apr 09, 2001 4:00 pm
Location: usa

Post by chippie »

Why pulsar I and SRB left out? It just so happens those are the two cards i have in my machine. As a long time user (6years!!) I am feeling a bit left out of the plug-in bonanza here, although must admit 98 euro for even just the pro12 alone is still a decent price for that device. Just seems unfair. I bought the pulsar I full price so long ago, and the SRB just as the Pulsar II was being released. Just my bad luck i suppose...
Post Reply