Does Scope 4.5 now allow a authorisation key to be used for

An area for people to discuss Scope related problems, issues, etc.

Moderators: valis, garyb

Post Reply
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

Just been reading up on the new Scope 4.5 which I found out about today. I think I read that there was now a new authorisation key system implemented with Scope 4.5 which meant that you can now run modules (by which I mean programs you purchase such as Impressor, proTone, Transient Designer etc.) on all installed boards as standard, rather than the old system where you would have to assign your authorisation key to one board and then could only run that module on that one board.

I cannot find where I read this now, so could someone clarify this for me? :smile:

<font size=-1>[ This Message was edited by: hesnotthemessiah on 2005-12-06 09:44 ]</font>
User avatar
astroman
Posts: 8455
Joined: Fri Feb 08, 2002 4:00 pm
Location: Germany

Post by astroman »

haven't read anything in this direction and it wouldn't make much sense imho.
The 'plugin authorization' is per device and per board.
If you get a new key for SFP then the devices that (possibly) come with it are authorized to that same board number you choose for SFP.

cheers, tom
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

Hi Astroman. I might have this wrong, but my understanding is that, when you purchase a device, that device is then authorised to run on one board only (you give a board's ID number and then get an authoriastion code to run that device on that board). It would be great if you could run that device on any other Scope board that you might have installed in your computer. I am sure I read this is now possible with Scope 4.5 but I can't find where I read this!! :eek:

<font size=-1>[ This Message was edited by: hesnotthemessiah on 2005-12-06 11:05 ]</font>
Guest

Post by Guest »

Copy protection with CW cards dictated that each card's SN will have a different Key for each and single device.

no 2 cards can have the same keycodes for software or even a single device.

otherwise keys are worthless.


<font size=-1>[ This Message was edited by: antar on 2005-12-06 11:19 ]</font>
User avatar
dbmac
Posts: 622
Joined: Sun Mar 25, 2001 4:00 pm
Location: Toronto

Post by dbmac »

On 2005-12-06 11:03, hesnotthemessiah wrote:
It would be great if you could run that device on any other Scope board that you might have installed in your computer. I am sure I read this is now possible with Scope 4.5 but I can't find where I read this!! :eek:
If the cards are in the same computer they operate as one system, with any software registered to any card available within Scope. If you remove a card, the software registered to it moves with it.
I'm not sure if this is what you're asking.

/dave
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

OK Let me put it another way...has anyone who has installed Scope 4.5 in a computer that has more than one scope board installed in it, found that they can now run all their Scope devices on all these boards and are no longer restricted to only being able to run their devices on the board for which they obtained the authorisation key?

If you have more than one Scope board installed in your computer then I can't see a problem obtaining an authorisation key for one of these boards and then being able to run the device on any other Scope board that is also installed in that computer. So long as you have the Scope board installed in your computer for which a Scope device has an authorisation key, you can also run that device on any other board installed in that computer. I am sure I read that this is now the case but can't find where I read this!! Maybe it was just wishful thinking. :razz:
User avatar
garyb
Moderator
Posts: 23380
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Post by garyb »

afaik, it works that way if i understand that you mean as long as the authorized card is also in the same computer.....
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

On 2005-12-06 12:07, dbmac wrote:
If the cards are in the same computer they operate as one system, with any software registered to any card available within Scope. /dave
Hi dave. I think it is the case with Scope devices that they will only run on the card that you obtain the authorisation key for. Timeworks offer an extra key generation for $39 so that you can run their devices on an additional card.
User avatar
garyb
Moderator
Posts: 23380
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Post by garyb »

i think that's for different cards in different computers(a discount)...
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

On 2005-12-06 21:45, garyb wrote:
afaik, it works that way if i understand that you mean as long as the authorized card is also in the same computer.....
Just loaded 28 Impressor stereo multiband compressors into my two Scope boards, even though I only have the authorisation key for one board. So it looks like I was wrong!! You can run Scope devices on all boards within your computer so long as the board you have the authorisation key for is installed. Wahooooooooo!! :grin:

Thanks to all those who replied. :wink:
djmicron
Posts: 1181
Joined: Wed Jul 23, 2003 4:00 pm
Location: Milano

Post by djmicron »

This is normal if all cards are in the same computer.

<font size=-1>[ This Message was edited by: djmicron on 2005-12-07 01:57 ]</font>
huffcw
Posts: 372
Joined: Fri Oct 25, 2002 4:00 pm

Post by huffcw »

Hasn't this always been the case? It isn't anything new with 4.5.
User avatar
valis
Posts: 7681
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Post by valis »

It has always been the case. I think he just needed clarification. :smile:
User avatar
hesnotthemessiah
Posts: 280
Joined: Mon Apr 11, 2005 4:00 pm
Location: Reading, England.

Post by hesnotthemessiah »

Yes valis. Clarification happily received. :grin:
Post Reply