Hi guys,
I already read some threads about this topic but just want a confirmation from Gary or experimented "old users".
I noticed recently some "board communication error" coming from 1 of my 2 pci cards, this appears only when I Use the dsps: meaning my default project with only a few effects is always OK but when I load a synth or other plugs I get this communication error. So the conclusion Gary pointed in the past is either:
- One of the cards is dying
- try to clean the pci gold contact
So I would like to try this and just need a confirmation:
Is contact cleaner OK for this?
Is Isopropyl 99% OK?
I hope the card is not dying as I work on a big project actually and I am near the end... I will try this when this project will be finished. Then it will be the time to change my config but I would like to keep this old config if my pulsar and luna still work OK
Thanks for your help!
clean PCI cards
-
- Posts: 97
- Joined: Sun Sep 12, 2004 4:00 pm
- Contact:
Re: clean PCI cards
Contact cleaner is caustic. 99% isoprobyl is 'ok' but I still find a film usually that needs to be polished off, and 100% acetone works if you're careful where you get it on the pcb.
My preference is CAIG Deoxit. 100% for cleaning and then 5% for 'conditioning' (leaves an oil film to retard oxidation).
My preference is CAIG Deoxit. 100% for cleaning and then 5% for 'conditioning' (leaves an oil film to retard oxidation).
Re: clean PCI cards
Deoxit Gold does not have the oil. it's probably better for card edge contacts.
-
- Posts: 97
- Joined: Sun Sep 12, 2004 4:00 pm
- Contact:
Re: clean PCI cards
Thanks guys looks like we've got a winner:
Deoxit gold
Hope it will make it!
Deoxit gold
Hope it will make it!
Re: clean PCI cards
Thanks Gary
Re: clean PCI cards
[soft before hard]
>additionally install a "bare" scopesystem eg "ScopeTest",
and check your error project.
>> just copy the requested files,
step by step ...
that can take a little time, but has always helped me.
>>>If the same message appears here, only then process your hardware!
>>>>good luck, i keep my fingers crossed
(external funds should be the absolute last resort)
>additionally install a "bare" scopesystem eg "ScopeTest",
and check your error project.
>> just copy the requested files,
step by step ...
that can take a little time, but has always helped me.
>>>If the same message appears here, only then process your hardware!
>>>>good luck, i keep my fingers crossed
(external funds should be the absolute last resort)
|̲̅̅●̲̅̅|̲̅̅=̲̅̅|̲̅̅●̲̅̅] Lange Welle ~ Mittelwelle ~ Kurze Welle ~ Ultra Kurze Welle
Scope Sandbox soundcloud ~ youtube ~ bc modular-guide° ~ modules-SR
Scope Sandbox soundcloud ~ youtube ~ bc modular-guide° ~ modules-SR