PlanetZ forums - scopeusers.com

Posted: **Thu Oct 17, 2002 1:53 pm**

I try to install the software that came with SCOPE card, but the install program says :" This does not work with Windows NT. You should use Windows 95/98"

And I'm using Win XP.

Posted: **Thu Oct 17, 2002 2:03 pm**

did you use ntfs?

Posted: **Thu Oct 17, 2002 2:20 pm**

I just think the software you received with the scope card is outdated... Go to the creamware site and download sfp3.1a + 3.1c update...

Not so long ago, scope didn't work on W2K or XP !

Posted: **Thu Oct 17, 2002 2:44 pm**

Yes, I have NTFS.

I also think it is out-dated. But someone said it is worth installing because there devices that are not part of SFP.

Posted: **Thu Oct 17, 2002 4:59 pm**

So then, just keep a local copy of the devices directory, uninstall it cleanly, reinstall sfp 3.1, then check the one you don't have, and get then from your previously saved devices directory...

Check if you see FMOne for example, this one doesn't exist no more, but was in older software, keep it!

Posted: **Fri Oct 18, 2002 4:27 am**

Wait a minute, I can't install the old version, so I can't know, what devices there are!
Do I really have to install Win98 to extract ScopeSoftware package.... and then just copy the devices to my WinXP SFP folder.

Posted: **Fri Oct 18, 2002 9:00 am**

Probably, but you can also check if you cannot get the file directly in the install directory...

Posted: **Fri Oct 18, 2002 2:11 pm**

No, because the files in installation media are compressed.

Posted: **Fri Oct 18, 2002 3:19 pm**

i'm not sure that i understand everything what you talking about, but i want to say that i use NTFS format on the partition with system.
my others partitions are fat32 and i have no problem.

Posted: **Fri Oct 18, 2002 3:27 pm**

Nothing to do with NTFS, he installed the old scope software version (2.04?) which was NOT W2K/XP compatible (like pulsar 2.04), but he wants the devices that were in this old software and are not in new software no more, like dynabus...

Ok, then you'll have to install it on W98, or ask here to scope guys to upload it to you (i'm only pulsarian), then SFP will just ask for your registration...

There is always a way!

Posted: **Sat Oct 19, 2002 4:39 am**

Marcus, I did NOT install the old software, because the installation failed!

Posted: **Sat Oct 19, 2002 4:57 am**

If it doesn't install under Win2k/XP and you can't acces the devices in the installation files, you should
1) Make a quick W98 install to get your devices -no tweaks needed, only to rip the old devices, throw them on Cd and dump the W98 again
or 2) ask another Scope user to mail you the files. If you then load them into your SFP, it will ask you for registration keys. Maybe they're allready in your keypack, or else request the right keys from CW.

Sorry for the hassle, but it will give you a better SFP

Posted: **Sat Oct 19, 2002 5:45 am**

at0mic, You're welcome to send them

Posted: **Sat Oct 19, 2002 5:56 am**

Sorry, ain't got no SP.

Posted: **Sat Oct 19, 2002 10:20 am**

On 2002-10-19 05:39, spoimala wrote:
Marcus, I did NOT install the old software, because the installation failed!

Sorry, that's what i meant..

Posted: **Sun Oct 20, 2002 12:08 pm**

you might try to install on fat32.

Posted: **Sun Oct 20, 2002 1:56 pm**

How can that help as it complains about OS, not HD. And the error comes before it asks installation destination location.

Posted: **Sun Oct 20, 2002 2:04 pm**

If you have a spare partition and Win98 near you, it will take you one hour to get all old devices

Posted: **Sun Oct 20, 2002 3:24 pm**

btw.
you don´t need to install 98 before. try to run it in the 98 compatible mode under xp.

PlanetZ forums - scopeusers.com

Scope doesn't work with Win XP???