PlanetZ forums - scopeusers.com

Since i am working with the sfp software
i am having some latency problems with cubase (!).
any tips on latency (help) ?

arish

Are you in xtc mode? If so, you need to use plug-in delay compensation etc.
I find going non-xtc is great, no latency, less dsp usage

Workaround for any seuencer, except from playing in:

Latency means the time the sound signal needs to go from the input to the output of your system. All digital audio signals are in need of of a certain latency time to go through.

Here´s the formula: samples x (1000ms/ 44100 samples) = latency in milliseconds.

Example: Lateny = 1056 Sample x (1000ms/ 44100 Samples) = ca. 24 ms.

If your recording uses this latency time while recording and you´re listening to the sound from the output you´ll notice that the sound is delayed to approximately 24ms.

When you recognize that certain tracks aren´t synchronous you know by now that this is due to the latency of your system which is exactly the same as the latency time mentioned above.

You´re able to correct this with the delay option in the play parameters box.


1. Set a "cycle" (playback loop)
2. Open the window audio hardware & driver from within the audio menu.
3. Next to the sound generators you´ll notice a field called delay. Vary the value int the delay field until midi and audio are in sync.

Thanks Zer..
can you be more specific about where do i set this values ,in cubase or pulsar ?
wich ctagory to look for ?

thanks
arish