Page 1 of 1
Posted: Tue May 21, 2002 6:05 am
by Clubjock
I have problems with the sts4000 and sts5000 sampler. The timing is terible. I have tried the pulsar on 3 different motherboards but no succes. I did the latest chipset updates but.... When I ad a sts2000 sampler it becomes much more stabel. Is this a bug?!. Tried different latency's on pulsar software. Pulsar helpdesk gives me no solutions. Is there somebody who has the same problems? ore knows how to solve this.
Pulsar 1 card (2times)
1800+ AMD
Via 266a chipset
Posted: Tue May 21, 2002 7:45 am
by subhuman
Are you sending:
1. Active Sensing
2. Lots of CC data
3. Lots of Sysex data
4. Midi Clock?
If so, disable them until your timing improves, so you can figure out if it's MIDI overload.
Next, do you have your STS connected to "Sequencer Midi Source" or from the hardware midi port "Pulsar Midi Source"? I have excellent success using the hardware midi ports connected to my eMagic AMT8 midi interface, which has the benefit of the Active Midi Transmission, which also makes your other midi hardware perform better ... it will track really fast (180bpm) 16th notes without glitching just fine, for example.
Hope this helps; if you have more info on how to reproduce your problem then maybe we can offer more advice.
Posted: Tue May 21, 2002 9:39 am
by subhuman
Oh yeah - did you ever try a motherboard with an Intel chipset?
Posted: Tue May 21, 2002 11:39 am
by Clubjock
What kind of motherboard and processor are you using?
On 2002-05-21 10:39, subhuman wrote:
Oh yeah - did you ever try a motherboard with an Intel chipset?
Posted: Tue May 21, 2002 11:40 am
by Clubjock
On 2002-05-21 10:39, subhuman wrote:
Oh yeah - did you ever try a motherboard with an Intel chipset?
What kind of motherboard do you use and processor?
Posted: Tue May 21, 2002 1:14 pm
by remixme
I noticed a slight latency problem with my sts3000 synth through cubase, could be my VIA chipset which I intend to get rid of soon.
If none of Subs tips work, I will check the problem again
Posted: Tue May 21, 2002 1:20 pm
by subhuman
My systems dating back to my first Pulsar1 using STS4000, never a problem with these:
Abit BX6r2, P2 350
ASUS CUSL2, P3 1000
ASUS P4TE, P4, 1800 (currently)