New (old stock) Z-Link plate for Scope/Pulsar cards
Posted: Sat Oct 10, 2020 2:52 am
New Z-Link plate.
Never used. Bought new (as separate CW product, not installed on the card) for backup my existing plate, but as I don't have a A16 XLR Ultra any more (I sold here: https://www.forums.scopeusers.com/viewt ... =8&t=36416 ), it became redundant for me.
It's production date is 2006 (from the latest batch, because SC was established in 2007).
The manufacturing date can be identified by the latest date of the chips on plate.
It is 52 week of 2005 (AKM codec), and 23 week of 2005 (Quick Logic chip).
So that's why it is from the middle of 2006.
Plate is in the perfect condition. Connected once for testing (one mark from the screw on pc chasis - see pics) with the Scope card.
All ins/outs are clean, tested and worked as it should.
Cable whip is missing (lost when moving), but I'll add a new D-Sub 26 pins connector with the shell, so you can make a cable whip by yourself with this manual:
https://www.scopeusers.com/ScopeRise/is ... ub_mst.htm
Choose DSUB Project Pinouts (not Professional).
Specs:
28 In / 28 Out
2 Analoge Unbalanced I/Os
8 ADAT Digital I/Os
2 S/PDIF Unbalanced Digital I/Os
16 Z-Link Digital I/Os (for A16 or Luna box converters)
1 MIDI In/Out/Thru
Price 80 Euro.
Buyer pays shipping.
Will ship worldwide.
Please, PM me if any questions.
Thanks...
Never used. Bought new (as separate CW product, not installed on the card) for backup my existing plate, but as I don't have a A16 XLR Ultra any more (I sold here: https://www.forums.scopeusers.com/viewt ... =8&t=36416 ), it became redundant for me.
It's production date is 2006 (from the latest batch, because SC was established in 2007).
The manufacturing date can be identified by the latest date of the chips on plate.
It is 52 week of 2005 (AKM codec), and 23 week of 2005 (Quick Logic chip).
So that's why it is from the middle of 2006.
Plate is in the perfect condition. Connected once for testing (one mark from the screw on pc chasis - see pics) with the Scope card.
All ins/outs are clean, tested and worked as it should.
Cable whip is missing (lost when moving), but I'll add a new D-Sub 26 pins connector with the shell, so you can make a cable whip by yourself with this manual:
https://www.scopeusers.com/ScopeRise/is ... ub_mst.htm
Choose DSUB Project Pinouts (not Professional).
Specs:
28 In / 28 Out
2 Analoge Unbalanced I/Os
8 ADAT Digital I/Os
2 S/PDIF Unbalanced Digital I/Os
16 Z-Link Digital I/Os (for A16 or Luna box converters)
1 MIDI In/Out/Thru
Price 80 Euro.
Buyer pays shipping.
Will ship worldwide.
Please, PM me if any questions.
Thanks...
