Page 1 of 1
reason 9.1 wont work with scope 5.1
Posted: Tue Nov 01, 2016 12:24 pm
by Manomars
I tried to run reason with Scope 64 bit on 2 systems and it wont work exept for running in rewire mode in cubase 7.5
Does anybody here have this problem or solved it?
|
Scope does run fine only have a bluescreen with samplers
Re: reason 9.1 wont work with scope 5.1
Posted: Tue Nov 01, 2016 12:30 pm
by yayajohn
Are you talking the Reason samplers or the Scope STS samplers?
STS samplers no workey on 64bit
Re: reason 9.1 wont work with scope 5.1
Posted: Tue Nov 01, 2016 12:49 pm
by Manomars
The scope samplers take me to bleu screen IRQ not equal or less
The real problem reason wont work.
Here in the forum some guys use Reason 7 and 8 so i could make it work.
Re: reason 9.1 wont work with scope 5.1
Posted: Tue Nov 01, 2016 2:31 pm
by Manomars
Solved
I used system configuration ->advanced boot option and used PCI lock
Then i isolated the IRQ of the pulsar on 11 and killed everything what shared that iRQ
Edit: half solved, the problem has something to do with the asio. I have to delete asio source or restart scope or restart reason randomly to get it working
Re: reason 9.1 wont work with scope 5.1
Posted: Tue Nov 01, 2016 8:02 pm
by garyb
Re: reason 9.1 wont work with scope 5.1
Posted: Wed Nov 02, 2016 6:34 am
by Manomars
No, i didnt,
Thank u very much Gary!
Will try this tonight.
Re: reason 9.1 wont work with scope 5.1
Posted: Wed Nov 02, 2016 3:16 pm
by Manomars
did work out fine
Re: reason 9.1 wont work with scope 5.1
Posted: Wed Nov 02, 2016 3:38 pm
by garyb
good!