PlanetZ forums - scopeusers.com

Hi guys,
is there a way to install 2 Pulsar II Classic on 2 adjacent PCI slots? Seems there is no enough headroom to do as the down side smaller board (screwed on the larger one and placed on first PCI slot ) touches the upper side of the second in the other slot. Someone here was succesful doing it?
Thanks very much

sure, lots of people have used that motherboard for 2 and 3 cards.
there should be a nylon/plastic shield on the part of the card that touches the other, so it shouldn't be a big problem if they're close as long as there is good air circulation in the case.

Ye same Mobo going strong here for years.

Yeah there are plastic sheets, I' ll try and add another good fan for air circulation as also my first Pulsar was a little too much hot...Thanks once again!

garyb wrote:sure, lots of people have used that motherboard for 2 and 3 cards.
there should be a nylon/plastic shield on the part of the card that touches the other, so it shouldn't be a big problem if they're close as long as there is good air circulation in the case.