Page 1 of 2
Posted: Fri Nov 02, 2001 9:14 am
by Sam Mo
Hi Pulsarians,
my first post here just to tell you that 3.01 update is available from the creamware site.
Here's what they say:
In addition to numerous optimizations and the correction of various problems, this version offers some new features with respect to version 3.0.
Automatic assignment of program change numbers to presets in the Presets dialog (with Autoindex in the preset context menu)
Optimization of the MicroMixer, Dynamic Mixer und PulsarMixer (ProPack):
- Modified behavior of the pan-control in stereo channels
- Switchable phase compensation, for sample-synchronized operation of all channels
- PulsarMixer: Aux effects can alternatively be loaded into an aux path via an insert-slot. Or use insert slots to apply insert effects to aux returns.
This update patch requires an installed version 3.0!
happy download
sam.
Posted: Fri Nov 02, 2001 9:23 am
by subhuman
Posted: Fri Nov 02, 2001 12:29 pm
by valis
Some giving soul should post a mirror again and help Creamware['s users] out. Timeouts & constant prompts for login & pass (too many users?)...
;-]
Posted: Fri Nov 02, 2001 2:35 pm
by subhuman
http://www.infinitevortex.com of course has mirror for PC version (we have no mac users yet!)
Posted: Fri Nov 02, 2001 3:08 pm
by algorhythm
thx sub, you da shit!
Posted: Fri Nov 02, 2001 3:12 pm
by samplaire
Posted: Fri Nov 02, 2001 6:11 pm
by garyb
thank you mr. man.
Posted: Fri Nov 02, 2001 10:00 pm
by at0m
c pas mal ça pour ton premièr post!
si tu continues comme-ça, tout t'ira bien
Posted: Sat Nov 03, 2001 7:42 am
by algorhythm
CW's site is down now (Sat. 11:00, US Eastern) - damn, I was gonna buy the propac . . .
Posted: Mon Nov 05, 2001 5:48 pm
by subhuman
Dual Monitor Bug fix also posted -- anyone with dual monitors should check the above links for a very small few kb fix for dialogs appearing out of sight.
Posted: Mon Nov 05, 2001 6:19 pm
by marcuspocus
I did, and it work perfectly now...
I love even more the PulsarMixer!
The aux are inline now, meening, you can insert aux effects without the need of wiring them!
coOl!!
Posted: Tue Nov 06, 2001 8:07 pm
by at0m
i don't seem to have that on the PulsarMixer (the AUX as inserts). Do I have another version? I had 3.01 installed, I overinstalled it yesterday to register the Propack.
I have the Aux lines on the Channels panel, next to the Busses. But where do I get the Internal Aux Effects Panel View?
I noticed a difference in Mixer on my Pulsar and the one displayed in the manual, it's situated in the lefthand top and lower corner of the Master Panel.
So I might have an older Mixer, but I have just re-installed 3.01 and registered the Propack?
Someone knows a better way to get the latest and greatest mixer?
a t
m i c
Posted: Wed Nov 07, 2001 5:51 pm
by Analog_Dude2000
Open the channel page of
the pulsar mixer,
and click on the "BUS" at
right down corner to view the
AUX's and the BUS's.
You will see that option there.
About the manual,
you need to download the new one.
BTW:
That little upgrade realy kicks ass...
The problem is that uses more dsp power.
Hope its a bug...
Posted: Wed Nov 07, 2001 6:42 pm
by marcuspocus
It doesn't use ANY DSP if you leave them to external, turn then on only when you use them... One by one!
Posted: Wed Nov 07, 2001 7:00 pm
by Analog_Dude2000
I was talking about the
new mixer when i said it uses more DSP,
not just the aux part...
Didn't you notice that...?
Posted: Thu Nov 08, 2001 12:33 am
by at0m
On 2001-11-07 17:51, Analog_Dude2000 wrote:
Open the channel page of
the pulsar mixer,
and click on the "BUS" at
right down corner to view the
AUX's and the BUS's.
You will see that option there.
About the manual,
you need to download the new one.
BTW:
That little upgrade realy kicks ass...
The problem is that uses more dsp power.
Hope its a bug...
LOL i think you are still behind. I have a manual which mentions AUX loaded as Insert on Mixer instead of click-connect externally in Project window.
Btw, I use AuxRack for now, gives me 120 extra CC# to assign.
a t
m i c
Posted: Thu Nov 08, 2001 7:03 am
by Analog_Dude2000
On 2001-11-08 00:33, atomic wrote:
On 2001-11-07 17:51, Analog_Dude2000 wrote:
Open the channel page of
the pulsar mixer,
and click on the "BUS" at
right down corner to view the
AUX's and the BUS's.
You will see that option there.
About the manual,
you need to download the new one.
BTW:
That little upgrade realy kicks ass...
The problem is that uses more dsp power.
Hope its a bug...
LOL i think you are still behind. I have a manual which mentions AUX loaded as Insert on Mixer instead of click-connect externally in Project window.
Btw, I use AuxRack for now, gives me 120 extra CC# to assign.
a t
m i c
I realy dont think that im
behind, cause im actualy using that
Option right now...
I gues you didnt anderstud my post...
Try to read it again...
(Sory for my bad english...)
<font size=-1>[ This Message was edited by: Analog_Dude2000 on 2001-11-08 07:04 ]</font>
Posted: Thu Nov 08, 2001 10:07 am
by at0m
Your English is ok
I can see the AUX channels next to the Busses in Channel Pannel, but I do not find where I can Insert them into Pulsarmixer like I do in an Aux/insert-Rack. without clicking to connect, so the AUx effect will no more listed on 'Device popup Bar', but will be part of the Pulsar mixer..
Not really a problem, but just that I found a discrepancy between manual and Pulsar OS. Manual has a more advanced Pulsarmixer (only for AUX) than the one that I can load into Pulsar, and I did the 3.01 update.
Comprendez?
I think i understood your reply, thanks, I hope we can sort our stuff out with this explanation
atomic.
Posted: Thu Nov 08, 2001 3:24 pm
by marcuspocus
On 2001-11-08 10:07, atomic wrote:
Your English is ok
I can see the AUX channels next to the Busses in Channel Pannel, but I do not find where I can Insert them into Pulsarmixer like I do in an Aux/insert-Rack. without clicking to connect, so the AUx effect will no more listed on 'Device popup Bar', but will be part of the Pulsar mixer..
Not really a problem, but just that I found a discrepancy between manual and Pulsar OS. Manual has a more advanced Pulsarmixer (only for AUX) than the one that I can load into Pulsar, and I did the 3.01 update.
Comprendez?
I think i understood your reply, thanks, I hope we can sort our stuff out with this explanation
atomic.
Here's how it look :
<img src="
http://007-production.fr/marcus/images/AuxInsert.gif">
_________________
<font color=yellow><b>Marcus Pocus</b>
The king is ALIVE!</font>
<font size=-1>[ This Message was edited by: marcuspocus on 2001-11-08 15:25 ]</font>
Posted: Thu Nov 08, 2001 3:30 pm
by Analog_Dude2000
1 picture = 1000 word's...
