modular rapture (some new modules)
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
modular rapture (some new modules)
Hi!
This topic is about my module creations.
complete download (in folders):
http://www.cwmodular.org/files/CwmModules.zip
for more info, check my site http://www.cwmodular.org.
stay tuned!
This topic is about my module creations.
complete download (in folders):
http://www.cwmodular.org/files/CwmModules.zip
for more info, check my site http://www.cwmodular.org.
stay tuned!
Last edited by roy thinnes on Sun Feb 21, 2010 12:39 pm, edited 39 times in total.
- Ben Walker
- Posts: 824
- Joined: Mon Apr 23, 2001 4:00 pm
- Contact:
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
Hi Kamil,
as for the 1 to 2 version of the threshold switch - please be patient, don't know atm how I could design it. In the meantime I would recommend Flexor's ModSwitch 1to2.
Concerning your other wish:check out the new MidiClockCWM, which is more convenient than the usual MidiClock/clockDivider/FreqDivider combination. The Gate/Clk outputs can be used for a direct connection to an envelope/Lfo... as well as to a seq module. Have fun!
as for the 1 to 2 version of the threshold switch - please be patient, don't know atm how I could design it. In the meantime I would recommend Flexor's ModSwitch 1to2.
Concerning your other wish:check out the new MidiClockCWM, which is more convenient than the usual MidiClock/clockDivider/FreqDivider combination. The Gate/Clk outputs can be used for a direct connection to an envelope/Lfo... as well as to a seq module. Have fun!
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
Hi Kamil again,
thanks for your great tip. In fact, I always wanted to have such a module, because the stock RandomGateGenerator is almost unusable for most applications. I think I made a decent one, see first post.
While we're at it, I'd like to thank Mr. Hund and all these sedulous dsp and software programmers for all their work. And not to forget Michael Ruf for his wonderful grafics.
This is software from another planet.
thanks for your great tip. In fact, I always wanted to have such a module, because the stock RandomGateGenerator is almost unusable for most applications. I think I made a decent one, see first post.
While we're at it, I'd like to thank Mr. Hund and all these sedulous dsp and software programmers for all their work. And not to forget Michael Ruf for his wonderful grafics.
This is software from another planet.
Hi Roy
Random gate module is great very THANKS - in modular patch section is my new patch example SCHG 3 and new noodle Chaogene with your modules
Little addition:
is possible to make your midiclock module with global start/stop button ? ( for start stop noodle and sequence )
My next modules tip:
- frequency divider and multiplier with modulation source
- simple lfo sine/pulse with input frequency source
- simple volume attenuator with mod source
MANY THANKS
Kamil
Random gate module is great very THANKS - in modular patch section is my new patch example SCHG 3 and new noodle Chaogene with your modules
Little addition:
is possible to make your midiclock module with global start/stop button ? ( for start stop noodle and sequence )
My next modules tip:
- frequency divider and multiplier with modulation source
- simple lfo sine/pulse with input frequency source
- simple volume attenuator with mod source
MANY THANKS
Kamil
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
- Ben Walker
- Posts: 824
- Joined: Mon Apr 23, 2001 4:00 pm
- Contact:
Hi Roy
Very THANKS new modules - my new example your val2gate modules in patch section SCHG4
Thanks new MidiClock module but im find little bug - when stop (start/stop) button freqdiv produce signal, not stoped ( clk/gate working = stoped )
AGAIN THANKS
Kamil
P.S my next tips for your future modules
- gate logic inverter
- gate logic flip/flop
- little gate sequencer ( small size 1U - only input and reset signal and 16 buttons )
- gate divider with mod. source
- value gate switcher 4to1
Very THANKS new modules - my new example your val2gate modules in patch section SCHG4
Thanks new MidiClock module but im find little bug - when stop (start/stop) button freqdiv produce signal, not stoped ( clk/gate working = stoped )
AGAIN THANKS
Kamil
P.S my next tips for your future modules
- gate logic inverter
- gate logic flip/flop
- little gate sequencer ( small size 1U - only input and reset signal and 16 buttons )
- gate divider with mod. source
- value gate switcher 4to1
- roy thinnes
- Posts: 651
- Joined: Thu Jan 09, 2003 4:00 pm
- Location: Graz
- Contact:
Hi again! I'm back with some more modules.
But first, some replies to your replies:
ok, so, for the new modules (switch16to1, 2to1, gateSeq + Gate+ModSeq): see first post as usual.
edit:
I've just realized that the "mod" part of the Gate+ModSeq module isn't working correctly, under certain circumstances. Please consider the current version as pre-release; I hope to get this fixed somehow.
But first, some replies to your replies:
ok Ben. You've had your break now. This time it's just 4 modules!Ben Walker wrote:
Every time I get near to completing the cwmodular devices page for my site you upload another load of modules !
Ben
mmh, the Freqdivider modules are sending continous signals, so there is no start/stop available. Use Lfos with gate retrig inputs instead. (if that's what you want)JLS wrote: Thanks new MidiClock module but im find little bug - when stop (start/stop) button freqdiv produce signal, not stoped ( clk/gate working = stoped )
at least one of your wishes is probably satisfied!JLS wrote: future modules
- gate logic inverter
- gate logic flip/flop
- little gate sequencer ( small size 1U - only input and reset signal and 16 buttons )
- gate divider with mod. source
- value gate switcher 4to1
you betcha!Shroomz II wrote:I see that you've been busy with the sdk Roy.
ok, so, for the new modules (switch16to1, 2to1, gateSeq + Gate+ModSeq): see first post as usual.
edit:
I've just realized that the "mod" part of the Gate+ModSeq module isn't working correctly, under certain circumstances. Please consider the current version as pre-release; I hope to get this fixed somehow.