Page 1 of 3
how much power have your system=?
Posted: Thu Jun 21, 2007 8:36 am
by sunset070
I would be much happy one if all the users of planet z answered to this question:
How much power have your system?
Which CPU and many DSP have your system?
I have P4 HT 3.6 and 2 Power pulsar + scope SRB
total 45 DSP
Thanks in advantage
best regard
Daniel from italy
Posted: Thu Jun 21, 2007 8:45 am
by hifiboom
21 DSPs
2Ghz / AMD / Hammer
Posted: Thu Jun 21, 2007 8:55 am
by erminardi
Host: AMD Athlon64 3500 Mhz -> 15+3= 18 DSP
Synth: AMD AthlonXP +2400 Mhz -> 6+6+4=16 DSP
I am done with this setup beacuse I prefer to play and "freeze" one track once.
I use Host in XTC mode (FX, masternig, recording) and Synth as external MIDI rack with synths like i.e. Solaris (max 5-6 voices) or Minimax (max 16 voices).
The "synth" PC is also used as ADAT recorder for the final mix (I prefer scope mixer summing instead Cubase's algo) & mastering.
Howewer, if in the future Scope Pro becomes cheaper than today, why not switch all 2 systems to 45 DSPs ?!
Posted: Thu Jun 21, 2007 9:46 am
by LHong
15 + 15 + 6 = 36 DSPs
3.01Ghz INTEL 2xCPU + 2GB-Mem Windows-PC
Posted: Thu Jun 21, 2007 12:54 pm
by bill3107
15 DSP + 6DSP
Core2duo E6600 (2,4 Ghz)
4 Go ddram super Talent on an Intel motherboard
Jonathan
Posted: Thu Jun 21, 2007 2:03 pm
by astroman
3 Pulsar One - 12 DSPs
Pentium III 1.2G Tualatin
512 MB SDRAM 133 Mhz
cheers, Tom
Posted: Thu Jun 21, 2007 4:25 pm
by slammah2012
AMD 64 FX-55 single core O.C'd. 2.852 GHZ....Air Cooled
MSI socket 939 SATA 2...pci / agp
2 gigs OCZ low latency DDR PC3200....timings(2,3,2,5)
Antec Sonata Case (quiet fans)
Windows XP pro SP2
Touch screen flatpanel...bye bye mouse...
52 in/ 24 out light pipe 2 midi universes
Posted: Fri Jun 22, 2007 10:54 pm
by HUROLURA
Scope Home + Power SRB = 3 + 15 = 18 DSP
NOAH Ex = 10 DSP
AMD 3200+ 994 Mhz / 512 Mo RAM
Posted: Sat Jun 23, 2007 4:09 am
by MD69
- 3 PowerPulsars = 45 DSP
- processor Intel E6700
- 4Gig CORSAIR
cheers
Michel
Posted: Sat Jun 23, 2007 4:11 am
by AndreD
19 DSPs
(Scope + Pulsar)
Intel Quadcore @ 2.4 GHz
Posted: Sat Jun 23, 2007 7:27 am
by bassdude
Commodore 64
6502 CPU
64KRAM
1 x SID chip
Posted: Sat Jun 23, 2007 8:32 am
by faxinadu
18 dsp here
Posted: Sun Jun 24, 2007 10:34 am
by King of Snake
AMD Athlon 64 3200
1x Pulsar 1 + 1x Powersampler + 1x Pulsar 2 = 13 DSP's
it's not enough!!!
Re: how much power have your system=?
Posted: Sat Mar 28, 2009 2:17 pm
by HUROLURA
A small update...
Well the 15 DSP SRB + the 3 DSP home are still there. The 11 DSP of the NOAH Ex also.
But some other cards joined the team:
- 1 x 3 DSP Luna
- 1 x 4 DSP Pulsar 1
- 1 x 4 DSP Pulsar 1 SRB
- 1 x 6 DSP Pulsar II
- 1 x 3 DSP Elektra
so the total is reaching 38 DSP now (+ the 11 DSP of the NOAH)
Plus a few others:
- 1 mono DSP Plugiator
- 1 dual DSP Minimax ASB
- 1 dual DSP Pro12 ASB
The road is still long to reach the 150 equivalent DSP of the Xite-1 ...
CheerZ
Re: how much power have your system=?
Posted: Sat Mar 28, 2009 2:31 pm
by Neutron
2 scope and 1 pulsar2 = 36 DSP
i had a E8400 CPU in there but i took it out and replaced it with a pentium core 2 5200 which can run with no fan (with a big enough heatsink)
and its plenty fast enough for scope.
the sequencer has a xeon 3210 (something like that equivelant to a Q6600,)
sequencer has EMU1212 for ADAT connection to scope(its about the cheapest card with ADAT i could find.)
both with 4 GB RAM
Re: how much power have your system=?
Posted: Sat Mar 28, 2009 4:28 pm
by fidox
audio computer -
2 x Pulsar XTC + 1 x Luna II = 15 DSP
Pentium 4 2.8 HT (Standard PC mode)
Abit IC-7 (875 chipset)
2gb RAM
ATI Radeon 9600
WD HDD 160GB
sequencer = Steinberg Cubase 4 Essential
second computer -
1 x Luna II
Celeron 3.0D (Standard PC Mode)
Asus P4C800 (875 chipset)
2.5gb RAM
Asus Nvidia GeForce 7600GS
3 x WD HDD (630GB)
Steinberg V-Stack
Re: how much power have your system=?
Posted: Sat Mar 28, 2009 4:38 pm
by Shroomz~>
Scope/sdk DAW
ASUS AN78X deluxe
AMD Athlon XP2200+
1 GB ram
Scope Pro + Pulsar II = 20 dsps
needs updating, but it works great & has always been a flawless system.
Our second Scope system is an old P3 with 6 dsps & is even slower.
(but it works)
~Mark
Re: how much power have your system=?
Posted: Sat Mar 28, 2009 5:34 pm
by microraver
See my signature.
P.L.U.R
Re: how much power have your system=?
Posted: Sun Mar 29, 2009 9:21 am
by Mike Goodwin
Pulsar 2
Intel Core 2Duo 6400
UAD2 Duo
Re: how much power have your system=?
Posted: Sun Mar 29, 2009 10:43 am
by iSiStOy
1 Scope pro II + 1 Scope pro I = 29 DSP
A16 ultra via ZLink
TC Electronic Konnekt24d in standalone via ADAT
+ some music hardware
Computer:
Intel Quad Q6600 @ 3GHz
Crucial 2x1GB RAM
600 GB RAID0 SATAII
400 GB RAID1 SATA
Geforce 8800GT
Cubase & Wavelab