PlanetZ forums - scopeusers.com

Posted: **Mon Aug 07, 2006 1:40 pm**

Hi planetz.
My new system crashing when im busy with mixing in the scope platform,
Pri.IDE cable to HHD& SEC.IDE cable to CD rom.My system not booting.
When ide to HHD is remove then SATA booting.
when pri.IDE socket from mobo cable to CD roms & sec.IDE socket from mobo cable to HHD
scope plaform does not work good.
please,i need some TIPs for my mainboard configuration:
Asus p5wd2-e premium(In.975x chipset)
pci.express:Extreme AX505
Memory.DDR2 533.1gig
1 SATA maxtor7200
1 IDE maxtor7200
1 cd burner
1 cd rom
1 Scope board.
1 pulssar1
Win.xp original.
I need info.to configure the Hardware, SATA,IDE CD roms CABLES & then the software,the bios especially.
thanx okntah

Posted: **Mon Aug 07, 2006 6:52 pm**

in the bios, which hd is the boot drive(it'll be in the boot menu)?

in programs/accessories/system tools/system information/hardware/conflicts-sharing, what irq is shared with the scope card?

Posted: **Tue Aug 08, 2006 7:52 am**

thanx garyb,
At this moment i have only one HHD.which is the SATA.

in the bios, which hd is the boot drive(it'll be in the boot menu)?
If you mean the boot priority:
1st.atapi cd.rom
2nd.flopy driv.
3rd.hhd.
The CW.cards,share no irq.they are respectively 21,22 irq.

Posted: **Tue Aug 08, 2006 9:58 am**

no, there is a choice as to whether drives are bootable...

Posted: **Wed Aug 09, 2006 9:13 am**

garyb
Do you an ideal how i could set & configure
this system to work with the cw board without CRASHING only when ever im mixing sfp ? (Asus p5wd2-e premium(Intel.975x chipset)I understand this very defferent from 32bit i was used to !
Ralf the same type of mobo.im going to ask him about his personal configuration.
thanx alot
okantah