PlanetZ forums - scopeusers.com

just to be sure i have understood the procedure for the plug ins transfer :

1) when you want to transfer from hardware X to hardware Y i must use systeminfo with X and epincpider with Y (receiving card), right? Or does the systeminfo/epincpider only involves the card that get rid of the plug ins?

2) On this subject, i know that all the plugs must be registered before the procedure but does it work if i have copy/paste the allkey infos in the scope.rgy file?

3) ... and (last question): i thought that epincpider blocked scope use until we get a file. Is it true? I mean, what appens once you have used epincpider? What must be done in order to let scope open again?

Just because i am going to make Ralph crazy with my emails.... He is very reactive but i know he is quite busy so if i could send 2 emails to fulfill the transfer that would be better...

Thank you guys !

well.. i am going to answer to my own question as Ralph as given enough information for it (hope it can help) ; furthermore it can prevent people - like me - to bother Ralph with 100 emails... :

- first of all if you want to transfer plug ins from card X to Y, the card X must be installed. You have previously purchased the 35/55€ transfer plug in at the creamware shop.
- you have to use a special plugin named systeminfo.mdl that you open in the rooting window, select the card X and copy/paste the string. Send it to creamware.

- then creamware will send you a PIK number and another special plug in named epincpider.mdl you will have to use on the same board (X). Watch out : once you open this plugin and write the PIK and select card X (again the same card from which you remove the plugs) scope does not work anymore. DO NOT UNINSTALL scope until creamware send you the new allkeys... otherwise the eprom has to be reprogrammed by creamware....

Beware that the card X must be instlled alone in the computer during the epincpider procedure.

That's it.

Jo

Beware that the card X must be instlled alone in the computer during the epincpider procedure.

That's it.

Jo

i've done the license transer with 3 cards installed on the same system, it is possible because the epincpider.mdl lets you choose the card where you need to remove licenses.