PlanetZ forums - scopeusers.com

Is it possible to cable let´s say 2 or 3 synths in one project to play layered sounds?

Greetz

diminu

<font size=-1>[ This Message was edited by: diminu on 2005-04-07 17:08 ]</font>

<font size=-1>[ This Message was edited by: diminu on 2005-04-07 17:09 ]</font>

Yes.Use midi splitter and send same midi channel to all.

You cab connect an output, Midi or Audio, to any number of inputs. Usually you connect all the synths to Seq.source, then if you have 2 synths on the same Midi channel, they will play the same midi part.

On 2005-04-07 18:41, alfonso wrote:
You cab connect an output, Midi or Audio, to any number of inputs. Usually you connect all the synths to Seq.source, then if you have 2 synths on the same Midi channel, they will play the same midi part.

Yes, but there is only one output on the Midisource. How to connect it to several synths?

greetz

diminu

On 2005-04-08 02:38, diminu wrote:

Yes, but there is only one output on the Midisource. How to connect it to several synths?

greetz

diminu

In the routing window you can do it.

diminu, i think you're thinking too literally. SCOPE's strength is that all outputs can go to as many destinations as you like, whether they are MIDI or audio. Just because an output is already connected doesn't mean you can't connect anything else to that output.

You can have as many devices connected to a MIDI output, and you can also send an audio output to as many different destinations as you want. Just click on the output icon as normal and connect it to another device. Easy peasy and flexible too.

Mr A

<font size=-1>[ This Message was edited by: Mr Arkadin on 2005-04-08 06:18 ]</font>

Thanks to all. Sometimes you don´t see the forest because of too many trees. ( Bad translation from german into english, sorry)

greetz
diminu