Page 1 of 1
Posted: Wed Feb 09, 2005 1:32 pm
by Diams
My DAW locks in SX 2.2 sometimes once an hour, sometimes every 5 mns...
It happens more frequently with my Mackie Control because of the high MIDI activity between the control surface and SX.
XP SP1 is with ACPI.
Should I try standard mode ?
Is there any settings in Bios or in SX which can fix the problem ?
Thanks for the help
Mathieu
Posted: Wed Feb 09, 2005 4:19 pm
by Diams
no irq sharing for the scope
only usb and graphic card shares an irq
Posted: Wed Feb 09, 2005 8:19 pm
by garyb
use the midi monitor. is your keyboard controller transmitting active sensing or clock? if so, disable those features or use a midi filter. also, beware of midi feedback loops.
Posted: Wed Feb 09, 2005 8:48 pm
by narly
You using a separate midi in/out direct to the Mackie Control, right? What midi interface(s) are you using?
Posted: Wed Feb 09, 2005 9:46 pm
by garyb
bingo.
Posted: Thu Feb 10, 2005 5:32 am
by Diams
I have made a few test.
If I don't use the midi of the Luna II and use only a Midiman Uno for the Mackie, everything works fine.
If I use only the midi of the Luna with Mackie or with a midi keyboard, it freezes... with the mackie every 5 mns, with the keyboard every 15 mns !
The problem comes from Luna's midi...
Even when I didn't use the Mackie I had this problem with this computer...
Before this asus motherboard, I had an Abit BH7IIRaid, I had to install xp in standard mode to fix another midi problem : at that time, the midi was late...
Please help !!!!
Posted: Thu Feb 10, 2005 1:16 pm
by garyb
active sensing is well documented to cause freezes, it's one of the only things besides a feedback loop or multiple clock sources.
so turn off active sensing on the keyboard(or use the midi filter) and use the midiman for the mackie control....