Page 1 of 1
Posted: Sun Jun 13, 2004 2:23 am
by Me - Di
Hi All.
Is there somone here who works with a
828mkII with a pulsar II card...?
I'm planing to buy one, and I just wendering
if they work well together.
(I want to conect it thro the ADAT conections, not with the Firewall.)
Thank you.
Posted: Sun Jun 13, 2004 4:58 am
by next to nothing
i agree, u might have problems recording thru a firewall
Seriously tho, only thing i heard about it was fuxed up things regarding firewire use, so u are right avoiding that.
Not much help in this answer, but anyway
Posted: Sun Jun 13, 2004 7:20 am
by valis
What computer type (Mac/PC), Operating System version and software are you using?
Posted: Mon Jun 14, 2004 2:39 pm
by jea
Using the 828mkII together with Scope?
No, I can't recommend it....
Posted: Mon Jun 14, 2004 3:01 pm
by Basic Pitch
If your on a PC you can pretty much be sure this combo will not function with out hitch, the MOTU cards and drivers are notorious for having "serious" PCI issues.
I suppose with a little praying and some good luck things may work out
Cheers!
Posted: Mon Jun 14, 2004 6:28 pm
by valis
There are many excellent dedicated converters on the market that offer adat (not to mention Creamware's a16 ultra).
Personally I use an RME hammerfall/multiface combo with my 2 creamware cards without any problems.
Posted: Sun Jun 20, 2004 1:25 am
by Me - Di
Thank you all.
But I don't realy understand, what kind
of problem could be, if I gonna use it
only as a convertor box thro the ADAT...?
My system is:
PC P3 866mhz
512 Ram
Pulsar II
Logic Audio 5.5
Posted: Sun Jun 20, 2004 1:15 pm
by astroman
imho it's just too expensive in comparison to adat only converters.
cheers, tom
Posted: Sun Jun 20, 2004 2:33 pm
by garyb
and it's not even that great.
Posted: Sun Jun 20, 2004 3:12 pm
by AndreD
hi,
if you ever plan to use the firewire-interface, you will need a TSB chipset from adaptec to play it save!
Posted: Wed Jun 23, 2004 1:24 pm
by Guillermo
I'm thinking to purchase a 828mkII as ADAT converter with my PC system and my two Scopes. So, I can use the Motu interface also with a Powerbook in live events.
Studio: PC+Scopes+828 ADAT
Live: Powerbook+828 FW