Page 1 of 1
Posted: Sat Mar 20, 2004 10:54 pm
by abbyk
Hi all
Ok - So I've inherited a pulsar1 card, but WITHOUT a cable (cablewhip ?)
Anyone have one to sell or know where I can buy from ? ( Do I need to go direct to Creamware ?)
Thanks for any info - just dying to get this DAW setup & make tunes.
abbyk
Posted: Sun Mar 21, 2004 11:56 am
by Cesax
Hi,what type do you need?
Posted: Sun Mar 21, 2004 2:04 pm
by abbyk
Hi Cesax - thnks for the reply
Its the regular cable that comes with the pusar 1.
A 26-pin D-type connector (like a small parallel port) leading to :
4 Unbalanced analog RCA connectors (2 stereo inputs and 2 stereo outputs)
2 S/PDIF connectors (stereo in and stereo out via digital coaxial cable)
3 MIDI connectors (in/out/through)
The I/O cable in the second picture here :
http://www.lnlrecording.com/Pulsar.htm
Thanks - abbyk
Posted: Mon Mar 22, 2004 3:59 pm
by Stubbe
If you know which end of a soldering iron you're supposed to hold (or know somebody that does
), the complete electrical diagram for the whip is in the Creamware support database under Pulsar -> any OS -> hardware -> pin assignment of the cable whip (you'll need to login):
http://shop.creamware.de/shop2000/de/sh ... .asp?LG=US
Good luck
Stubbe
<font size=-1>[ This Message was edited by: Stubbe on 2004-03-22 16:01 ]</font>
Posted: Mon Mar 22, 2004 4:35 pm
by abbyk
Thank you Stubbe
I was hoping not to go to those lenths - but hell if I cant source an original then I'll do it.
cheers abbyk
Posted: Tue Mar 23, 2004 11:07 am
by Cesax
I've this cable new & never used because I've purchased Scope/SP 24 ADAT & into parcel I've found this cable(probably it's an error by the old user)
please contact me with a private message &.....cable is yours
Posted: Thu Mar 25, 2004 6:44 am
by Cesax
Do you need the cable for classic plate?
let me know
Posted: Thu Mar 25, 2004 1:17 pm
by abbyk
Hi Cesax
Thanks again
Been trying to find out the spec for "classic plate" - its difficult !
these 2 links show small pics only :
http://www.netzmarkt.de/thomann/thoiw9_ ... dinfo.html
http://www.dancetech.com/aa_dt_new/shop ... Dcreamware
It "seems" to be the SAME cable.
If you could just check for me that the D-adapter is 26 pins - then I'm pretty sure its the same.
That would be awesome
Sorry if this is touble for you - I just want to try & make pretty sure I will get a cable that works.
abbyk
Posted: Thu Mar 25, 2004 2:04 pm
by Cesax
I?VE THE SAME CABLE TO SELL!!!!!!!!!!!
Posted: Thu Mar 25, 2004 3:44 pm
by abbyk
Hi Cesax
I have PMed you
abbyk
Posted: Sat Mar 27, 2004 9:58 am
by Cesax
Hi Abby,have you received my email?
Posted: Wed Mar 31, 2004 9:51 pm
by abbyk
Have agreed to buy cable from Cesax - but am putting off until I recieve confirmation that it is indeed the correct cable.
New post here :
http://www.planetz.com/forums/viewtopic ... 35&forum=5
abbyk