Page 13 of 14

Re: SCOPE v5 PCI RC is available!

Posted: Tue Jun 16, 2009 10:10 pm
by ACIDkNiGhT
I finally decided to upgrade my SFP 4.0 and the only thing I use on the damn board (that is XTC mode) doesn't work, yet. Maybe soon.
I just hope guyz from S/C get it together.
It is still an excellent card, even with 4.0, but I'm tempted by the new plugins. I always wanted a decent compressor for XTC.
Holdin' on to my money 'till XTC works as intended.
It is going to be a long hot summer. I'm hoping to spend it with SCOPE 5. 8)

Re: SCOPE v5 PCI RC is available!

Posted: Tue Jun 16, 2009 10:40 pm
by iSiStOy
If someone wanna try SCOPE 5 RC in XTC mode try that workaround :

Edit:
http://forums.planetz.com/viewtopic.php ... 11#p247311

It works!

:D
Have a go with that: apparently, if you find the right way to do it, it works.

Re: SCOPE v5 PCI RC is available!

Posted: Tue Jun 16, 2009 10:54 pm
by the19thbear
I can confirm that it works..
And it even works a little better than before.
But there is still work to be done though..

Re: SCOPE v5 PCI RC is available!

Posted: Tue Jul 28, 2009 6:13 am
by tomylee
Is it possible that I have 4.0 but use SFP4.5? Cause I use it and it works, I just downloaded it and it starts everyday. Maybe it is because I have all the extra plugins that 4.5 offers but I dont have 4.5...this is strange, my current card I bought used and it seems it hase everything 4.5 has, but with 4.0 SFP...

And now I have to pay for the upgrade?

Are there somewhere listed the exact differences between 4.0 and 4.5?

cheers
tomylee

Re: SCOPE v5 PCI RC is available!

Posted: Tue Jul 28, 2009 10:17 am
by garyb
the difference between 4.0 and 4.5 is the package of devices. 4.5 will work with 4.0 keys, but you won't get all the devices. as to the upgrade price, it's not strange, unfortunately. you just have to pay if you never had 4.5 keys.

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 10:25 am
by kylie
there is a new release up on ftp (build 2609), in case you didn't notice... ;)
xite software was updated to 2609 as well.

ah yes, and a sample player v5 and the spl td v5 are there, too.

-greetings, markus-

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 11:07 am
by the19thbear
does it need new keys??

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:14 pm
by at0m
the19thbear,
that's quite unlikely for such a subversion update. it would flood support@sc, and they'd have to distribute all new keys to all testers.

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:18 pm
by Immanuel
I just installed the 2609 version. At some point, I was asked if I wanted to repair or uninstall. I choose repair. I don't know, if this was the right thing to do. I quick comparizon (only looking in the folder, which had a new size) I found 6 new files in the app/sys folder.

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:26 pm
by nightscope
Immanuel wrote:I just installed the 2609 version.
Excellent. Immanuel goes where nightscope fears to tread. :)

Anything remotely exciting in there thus far?

ns

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:41 pm
by siriusbliss
installed OK here.
seems to be system-level update only at this point.

Greg

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:55 pm
by nightscope
siriusbliss wrote:installed OK here.
seems to be system-level update only at this point.

Greg
I'm going in. Nurse, scalpel. Wipe.

ns

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 12:59 pm
by Immanuel
nightscope wrote:
Immanuel wrote:I just installed the 2609 version.
Excellent. Immanuel goes where nightscope fears to tread. :)

Anything remotely exciting in there thus far?

ns
I only use parts of the system. For the minuttes I have had my simple default project running with my drivers and a couple of modular synths as "mixers" and control stations, I have not noticed anything.

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 1:15 pm
by nightscope
OK, IM.

ns

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 3:30 pm
by dawman
I am always leary about upgrading, but I have screwed myself so well in the past I decided to think, and take the proper steps.
First thing I noticed was many, many DSP files had recent dates instead of the ( yawn, yawn ) usual November 2008.
After everything I loaded up my heaviest project, which was at the brink of DSP overloads even though it says 50% on the meter.
To make a long story short I was already a FAT BASTARD, and now I am extremely obese.
SInce I noticed a 100% improvement right off the bat, I saved everything and now I am going after my long lost loves...............QWave, MultiSynth, FP106C, MB4-II, FB5 and Flexor III monstrousisties.
This is an excellent update for XITE-1, can anyone else confirm this.
I guess I could wait until this weekend when you schmucks turn 'em back on again....... :lol:

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 4:11 pm
by siriusbliss
I'm digging in now...

Greg

Re: SCOPE v5 PCI RC is available!

Posted: Mon Aug 10, 2009 5:33 pm
by Immanuel
XITE-1/4LIVE wrote:First thing I noticed was many, many DSP files had recent dates instead of the ( yawn, yawn ) usual November 2008.
You are right. My little fast "test" apparently was too fast. :roll:

Re: SCOPE v5 PCI RC is available!

Posted: Tue Aug 11, 2009 2:52 pm
by nightscope
Has anyone got VDat to work in v5 yet? Still hosed over here.:(

ns

Re: SCOPE v5 PCI RC is available!

Posted: Tue Aug 11, 2009 3:08 pm
by netguyjoel
you said "hosed".... :lol: I still think they are working on it....along w/ XTC mode too...so we don't need the workaround...

Re: SCOPE v5 PCI RC is available!

Posted: Tue Aug 11, 2009 3:33 pm
by nightscope
netguyjoel wrote:you said "hosed".... :lol: I still think they are working on it....along w/ XTC mode too...so we don't need the workaround...
Round heyah "hosed" means not working. As in broked.

ns