Page 2 of 3
Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 6:44 am
by dawman
Yes I am an immature person who owns an XITE-1, I accept that title.
You on the other hand you are a pest who follows GaryB wherever he posts and tries to purposely antagonize him.
Just want to make sure folks know who you and I are, no sugar coating necessary.
Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 7:48 am
by hubird
You can relax Stardust: Europe can have it's social democracy again without being called fascistic just for that, and Planetz is no longer kinda platform for promoting conspiricy and doom (´my own little garden´, free for those who agree with the gardener, or something).
It´s clear that some of us will never be close friends, but that shouldn´t be a problem, if the forum keeps an open character.
...Me still ready to discuss every subject on Earth, including NWA, war threats, or even granberries, if only with an open mind

Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 8:31 am
by dawman
NWA is still my favorite band of Rappers........
Ice Cube will swarm, on any M.tha.F....r in a Blue Uniform...BOOV_BOOV-ttsshh..

Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 8:33 am
by hubird
NWA...you never heard of the New World Arder??

Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 8:47 am
by dawman
Yeah, and actually New World Awder is actually NWO with a Boston accent.
Had a boss named Arber once, and our foremen would call him on the radio and would say Dave Abba, ....come in....
He too, was from Boston.
Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 11:00 am
by peksi
this thread has turned into garbage.. but thanks for you guys who stayed on the subject.
Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 1:00 pm
by SilverScoper
So...question...why is it so hard to turn XITE on first ? No-one seems to be debating over a PCIe graphics card having power on by the time the O/S boots.
Re: Powering XITE on after PC -> no go
Posted: Fri Feb 08, 2013 1:22 pm
by dante
peksi wrote:critics for a commercial products should be taken as suggestions for improvement.
Up to a point, but those suggestions should go to the manufacturer if the author really expects anything to be done. And I would think in the case of a hardware suggestion, it would only be relevant if there was an announced intention on manufacturers part to release a version 2.
So far only software upgrade is on the roadmap.
Re: Powering XITE on after PC -> no go
Posted: Sat Feb 09, 2013 4:30 pm
by Mr Arkadin
SilverScoper wrote:So...question...why is it so hard to turn XITE on first ?
Yeah, we have real hardships to face these days.
Re: Powering XITE on after PC -> no go
Posted: Sat Feb 09, 2013 4:51 pm
by yayajohn
yes plenty of other stuff for the handful of people at SC to do first before getting to the little annoyances that i'm sure we all can live with for now. I'm sure that I'm just not seeing the big picture of things but why not just either leave everything up and running and instantly ready to use for hours like I do, or if you really want to conserve power just shut it completely down until you are ready to work.
Just curious, but is it a save the planet concern or a preserve the Xite and computer concern?
Re: Powering XITE on after PC -> no go
Posted: Sun Feb 10, 2013 6:06 am
by peksi
yeah it's no big deal to reboot computer whenever i power cycle my XITE. it's all about sound and quality. these kinda things are 99% irrelevant but just wanted to shoot it to the experts here.
i guess it is a bad habit to leave your PC on for days.. especially in these times. but i just like to leave my work all over desktop and continue where i left from. if i close all i tend to forget where i was last time with my programming work.
Re: Powering XITE on after PC -> no go
Posted: Sun Feb 10, 2013 7:59 am
by yayajohn
yeah i can certainly understand that. When inspiration hits you don't want to be fiddling around trying to get your rig back to it's last configuration. To me leaving your work open/unsaved is risky to pwr outages/surges and plain Windows suckage that may freeze your system among other things. What I have developed (and prob most people here) is the extensive use of presets and "Save As" for Scope projects and also for your DAW projects. I also leave myself notes in case all else goes wrong. Your computer will most likely outlive it's usefulness before you decide to upgrade again and the Xite......well I have a feeling that is built to last as long, if not longer than the 30+ yr old synths I still have and pwr up flawlessly everytime.
Re: Powering XITE on after PC -> no go
Posted: Tue Feb 12, 2013 7:19 am
by Mr Arkadin
Weird. I do the exact opposite - leave the XITE on (unless I know I'm away for a long period) and turn the computer on and off.
However, in my researches I came upon this elegant solution:

- resize.JPG (623 KiB) Viewed 4801 times
PM me if you need the schematics.
Re: Powering XITE on after PC -> no go
Posted: Tue Feb 12, 2013 7:34 am
by Bud Weiser
Mr Arkadin wrote:Weird. I do the exact opposite - leave the XITE on (unless I know I'm away for a long period) and turn the computer on and off.
However, in my researches I came upon this elegant solution:
PM me if you need the schematics.
Bud
Re: Powering XITE on after PC -> no go
Posted: Tue Feb 12, 2013 1:12 pm
by yayajohn
I should try that to save the ol' DOH......reboot!

Re: Powering XITE on after PC -> no go
Posted: Tue Feb 12, 2013 5:13 pm
by wayne
My guitarist mate put a sign next to his bed - "Pants first,
then shoes"
This helps him in the morning

Re: Powering XITE on after PC -> no go
Posted: Tue Feb 12, 2013 8:33 pm
by hubird
Re: Powering XITE on after PC -> no go
Posted: Mon Jan 19, 2015 4:10 am
by krizrox
I've always followed the philosophy of turning everything on before the final device that sends audio to speakers. Turn off the thing that sends audio to speakers before everything else. This philosophy has served me well for decades and it seems to work well in the case of Xite.
Re: Powering XITE on after PC -> no go
Posted: Mon Jan 19, 2015 7:20 am
by siriusbliss
Always turn Xite on first.
Always turn Xite off last.
G
Re: Powering XITE on after PC -> no go
Posted: Mon Jan 19, 2015 7:39 am
by dawman
I consider the XITE-1 an expensive well made Server.
It's in a rack with vintage analog synths and FX, all controlled by powering on the Line Conditioner.
Whenever I screw up, I pull out my server and re seat the PCI-e 1x card.
Seems to remember where it came from.