Elektra, Pulsar 1 & Pulsar XTC

dejandanilo · Post by **dejandanilo** » Thu Jul 05, 2007 9:46 am

Maybe I need to get a different computer set up. Maybe you have a good recommendation for a stable computer that I can put together. Many thanks in advance......

DejanDanilo

husker · Post by **husker** » Thu Jul 05, 2007 3:51 pm

What is your midi setup? The midi in the scope cards can flood and cause hanging.

dejandanilo · Post by **dejandanilo** » Thu Jul 05, 2007 4:32 pm

I'm sorry, but I'm not quite sure what you mean by MIDI Set Up. Many thanks...

DejanDanilo

tgstgs · Post by **tgstgs** » Thu Jul 05, 2007 9:42 pm

i have the same MoBo and using it without a problem;

'computer always freezes when I move my mouse around'

i would check the grahcard;
if possible try anotherone just to test if probl. stays
i have a matrox;
also try another mouse
i once had probl. with a optical one

good luck

dejandanilo · Post by **dejandanilo** » Sat Jul 07, 2007 8:29 am

I use a regular mouse and I installed another Graphic Card for change. My problem occurs 20-30 minutes into my music making in Cubase or Nuendo in MIDI. Everything starts to slow down gradually. Its interesting that I do not have this problem in my other comp that I use for doing everything with the same MoBo using SB Audigy and with no tweaks at all ( I use only Nuendo or Cubase, LESS Gigastudio3). I'm guessing, there is probably something that most likely needs to be tweaked. Or, maybe I need to adjust something with the MIDI Port Enabler? I'm using Windows XP SP1 the Nuendo 3 in combination with the Gigastudio 3 and the Scope obviously. Many thanks for all your help and advice in resolving this problem.

DejanDanilo

dejandanilo · Post by **dejandanilo** » Sun Jul 08, 2007 8:15 am

Does anyone know how I can disable Hyper Threading since I've read that it serves no purpose but only irritates the sound cards in some cases. Many thanks in advance for all the help.

Dej@nD@nilo

Post by **garyb** » Sun Jul 08, 2007 11:25 am

if it all starts slowing down, that indicates that a backround process has started(usually). is there an updater or antivirus open? is there an active internet connection while doing music? is there a virus running?

turn off hyperthreading in the bios(first page). i do this as a matter of course with p4s. the loss of performance is minimal.

dejandanilo · Post by **dejandanilo** » Sun Jul 08, 2007 2:15 pm

It seemes as though I resolved this problem as well ( I'm crossing my fingers)! I hope I dont have any more problems so that I can have peace and enjoy my music making at once without any interruptions. Many thanks for all your great and resolving help....ALWAYS!!!!!

Dej@nD@nilo

dejandanilo · Post by **dejandanilo** » Tue Jul 10, 2007 5:51 pm

How can I use the Pulsar XTC only to run VST Plug-ins. I have mixers that will not open when I click on a particular one, it asks me for the allkeys. Many thanks in advance for all the help.

Dej@anD@nilo

dejandanilo · Post by **dejandanilo** » Wed Jul 11, 2007 6:40 am

Thanx.....

dejandanilo · Post by **dejandanilo** » Tue Jul 17, 2007 12:42 pm

I need to know how I can use my Generated Downloads (.oxe files). I tried to put them into the SFP folder and they are listed in the routing window options on top, but when I click to select anything, there is no reaction or in some cases with other devices it asks me for the registration codes or similar. I registered all 3 cards to my name since i bought them used (in excellent condition). I do not understand what seems to be the issue since all the cards are officially mine, why I cannot use all the functions and stuff that the previous owner used. Many thanks for all the help in advance.

Dej@nD@nilo

Post by **garyb** » Tue Jul 17, 2007 1:35 pm

you can only use devices you have a key for. if the registration dialog asks for a key, you can point it to your allkeys.skf file, but that won't work unless the key you need is in the file....

kylie · Post by **kylie** » Wed Jul 18, 2007 12:23 am

if yu have generated download .oxe files, you can put them into a special folder (called install imho) somewhere within your scope folders. they will be recognized and installed at next sfp startup. since the generated files contain the needed key (that makes them different from the nokeys_oxe files you can download from the CW ftp) you won't have to type them in afterwards. you have, of course, to have the card that the oxe file is bound to pluggin in and recognized by the sfp software.
putting nokeys_oxe files into the abovementioned folder also works, but you have to import the keyfile containing the license string when prompted. manually typing in the activation code is also possible. it's a subset of the license string found in the allkeys.skf/scope.rgy. I can check where it usually starts and ends, if that's of interest for somebody (well, everybody having activated plugins in the registry window and a keyfile could check that

)

-greetings, markus-

Herr Voigt · Post by **Herr Voigt** » Wed Jul 18, 2007 11:35 am

I think this special folder is called ...\app\oxe.
Good luck.

dejandanilo · Post by **dejandanilo** » Wed Jul 18, 2007 8:45 pm

Many thanks to all, I'll try and see what happens and will keep you posted.

Dej@nD@nilo

kylie · Post by **kylie** » Wed Jul 18, 2007 11:23 pm

Herr Voigt wrote:I think this special folder is called ...\app\oxe.

hadn't have a reference in front of me while posting, but your suggestion sounds good

-greetings, markus-