Posted: Sat Feb 19, 2005 2:01 pm
the basic model doesn't have raid, but yes you can always choose PATA/SATA...I'm going for the intel d865perl.
I saw it had Raid on it. It isn't a problem for you?
PlanetZ forums - scopeusers.com
Scope Users Community
https://www.forums.scopeusers.com/
Asio,sts, and pci
Page 2 of 2
Posted: Sat Feb 19, 2005 2:18 pm
Well,thisone is basic, right? It has raid. But hey, if you can turn it off it's allright.
<font size=-1>[ This Message was edited by: cream on 2005-02-19 16:22 ]</font>
<font size=-1>[ This Message was edited by: cream on 2005-02-19 16:50 ]</font>
<font size=-1>[ This Message was edited by: cream on 2005-02-19 16:22 ]</font>
<font size=-1>[ This Message was edited by: cream on 2005-02-19 16:50 ]</font>
Posted: Sat Feb 19, 2005 10:29 pm
that's the one. turn off the onboard sound etc.. raid is supported for the sata connectors, but the board is not configured for raid out of the box. use PATA/SATA. if you don't use SATA drives, you can disable that too.
Posted: Sun Feb 20, 2005 5:35 am
I would like to have thefirst
one with nothing on it.
. Do you know how they call these configurations?
one with nothing on it.
. Do you know how they call these configurations?Posted: Sun Feb 20, 2005 5:55 am
d865perl.
with lan(the second one), d865perll.....
with lan(the second one), d865perll.....
Posted: Mon Feb 21, 2005 4:59 pm
ok, one last question.
I didn't found the 'basic' d865perl. I did found the d865perl with everything on it.
Is the performance the same as the 'basic' if I switch everything off (LAN, RAID, IEEE 1394a) or is it better to keep searching for the basic board with nothing on it? There are not much Intel dealers in Holland it seems... One shop didn't even know Intel boards existed. sigh...
I didn't found the 'basic' d865perl. I did found the d865perl with everything on it.
Is the performance the same as the 'basic' if I switch everything off (LAN, RAID, IEEE 1394a) or is it better to keep searching for the basic board with nothing on it? There are not much Intel dealers in Holland it seems... One shop didn't even know Intel boards existed. sigh...
Posted: Mon Feb 21, 2005 10:55 pm
yes, it should work fine with all that disabled, but you'll be paying extra if you will not use lan or firewire in the future. i get those boards online. the prices are better and the board is common.
Posted: Tue Feb 22, 2005 11:53 am
Ok, I ordered the board. Looking forward to a stable system. Thanks for help Gary.
Posted: Sun Feb 27, 2005 10:28 am
Today I also did some testings.
So I did this:
Scope S/P pci card in G4 dual1.25 on system9.2
connected with optical cable with RME Fireface 800 like standalone converter to monitors genelec S30D in studio.
I played track from SparkXL thru asio16 bit driver stereo on scope platform routed directly to adat out.
Track that I played sounds much inferior on scope where was slave to Fireface800 because it has superiour word clock(StedyClock-No Jitter) than in the OSX on Peak 4 CoreAudio driver.And when the scope is set on master mode it is even worse.
Difference is this: Stereo is much wider ,high freq. was much more defined and that's why I heard Eff on voice much more better.Dynamic was better too.
Conclusion: Asio driver is not for professional use for shure.
That's why I spent two years trying to make high quality mix and I never succeded.But with LogicPro6 it was peace of cake. That dither system Powr is perfect.No more tiny little sound on 16 bit.Cubase is definitly out ,and it never worked perfectly.I used Cubase since version 2 and it never was flawless like Logic.
So I did this:
Scope S/P pci card in G4 dual1.25 on system9.2
connected with optical cable with RME Fireface 800 like standalone converter to monitors genelec S30D in studio.
I played track from SparkXL thru asio16 bit driver stereo on scope platform routed directly to adat out.
Track that I played sounds much inferior on scope where was slave to Fireface800 because it has superiour word clock(StedyClock-No Jitter) than in the OSX on Peak 4 CoreAudio driver.And when the scope is set on master mode it is even worse.
Difference is this: Stereo is much wider ,high freq. was much more defined and that's why I heard Eff on voice much more better.Dynamic was better too.
Conclusion: Asio driver is not for professional use for shure.
That's why I spent two years trying to make high quality mix and I never succeded.But with LogicPro6 it was peace of cake. That dither system Powr is perfect.No more tiny little sound on 16 bit.Cubase is definitly out ,and it never worked perfectly.I used Cubase since version 2 and it never was flawless like Logic.
Posted: Sun Feb 27, 2005 2:44 pm
Deneb,
First, this is pure bullshit...
Second, this response wasn't related at all with this particular thread.
Third, no need to post the same complains in all the forums here.
Maybe you had problem with creamware and feel revenge by spreading things?
<font size=-1>[ This Message was edited by: marcuspocus on 2005-02-27 14:46 ]</font>
First, this is pure bullshit...
Second, this response wasn't related at all with this particular thread.
Third, no need to post the same complains in all the forums here.
Maybe you had problem with creamware and feel revenge by spreading things?
<font size=-1>[ This Message was edited by: marcuspocus on 2005-02-27 14:46 ]</font>
Posted: Sun Feb 27, 2005 2:57 pm
this IS bullshit. also, i can tell from your post that you are NOT an engineer or anyone fit to judge ANY audio product. you are just someone with an axe to grind. if you are happy with your new machine, fine. go use it.
Posted: Tue Mar 01, 2005 8:11 am
Do you have Ears? Can you notice the difference between recorded audio on Vdat and Cubase???On 2005-02-27 14:57, garyb wrote:
this IS bullshit. also, i can tell from your post that you are NOT an engineer or anyone fit to judge ANY audio product. you are just someone with an axe to grind. if you are happy with your new machine, fine. go use it.
Posted: Tue Mar 01, 2005 11:10 am
deneb - please post on-topic.
You may have noticed, this is a forum for sharing expertise.
You may have noticed, this is a forum for sharing expertise.
Posted: Sat Mar 26, 2005 4:46 pm
The mobo (intel d865perl) is working great!
I can run like 15 masterverbs at once without the pci error. (in fact i didn't get it, my dsp's were overloaded.)
I can run like 15 masterverbs at once without the pci error. (in fact i didn't get it, my dsp's were overloaded.)
Posted: Sat Mar 26, 2005 10:28 pm