Scope 7

[JoPo]

Wow ! Peter, did you reinstall windows each time ? I'm not sure it helps.

Well... Backup your dsp folder, then delete it, then copy the dsp folder I made. It seems to be clean for Scope 7.

Dsp.rar

(6.62 MiB) Downloaded 369 times

I added all third part dsp's I collected since years + all new Scope 7 dsp's overwrited those that was older. Maybe there will miss some rare files but you certainly have them.

[Peter4724]

do you have the correct version of DAS coef11 .sys?

there is a 32 and a 64bit version.

For sure

[Peter4724]

Wow ! Peter, did you reinstall windows each time ? I'm not sure it helps.

Well... Backup your dsp folder, then delete it, then copy the dsp folder I made. It seems to be clean for Scope 7.

Dsp.rar

I added all third part dsp's I collected since years + all new Scope 7 dsp's overwrited those that was older. Maybe there will miss some rare files but you certainly have them.

I have a clean Windows 10 image.

I'll try your dsp files.

[shayart]

I have V7 reinstalled clean and then the dsp, sys .. files from DAS, Orbitone .... copied. The Legend and Master it EQ crash Windows. I will try a different method tonight.

Apparently, there are DAS dsp files in Scope 7.0 installer and maybe some have been updated to work with Scope 7. Maybe you could install Scope 7 on another computer, then copy dsp files on a usb stick in order to overwrite them on your Scope computer dsp folder.

I tried to extract the files from the Scope 7 setup with "Universal Extractor" but it was not able to do the job ! So I did like Shayart : I installed it on an old laptop and copied all the Scope 7 folder to keep all those files somewhere. Just in case...

first attempts by last night.
1. Scope 5.1 84 bit backup (all plugins are working properly)
2. Clean Windows 10 64 bit installation
3. Installation Scope v7
4. Copy all original DAS dsp, sys files from Sonic Core page into the right folder.
5. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)

second attempts last night.
1. Clean Windows 10 64 bit installation
2. Installation Scope v7
3. Copy all DAS dsp, sys files from old Scope 5.1 installation into correct folder.
4. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)

third attempts last night.
1. Clean Windows 10 64 bit installation
2. Installation Scope v7
3. Copy all dsp, sys files from old Scope 5.1 installation into correct folder.
4. Installation again Scope v7
5. THE Legend and Master It EQ crash Windows. (DAS coef11 .sys)

I give up

in all the stages you missed one thing.....( Do not copy DAS dsp files at all )

1-Do not copy DAS dsp files at all ! ! ! It already exists iv v7 !
2-copy only dev files !!! And note that it is 64bit
3-download Here (64 bit)
http://scope.zone/index.php?id=1978&lg= ... dows_64bit

And that will solve the problem

And if you do not want to reinstall....Replace the dsp files From the link
https://www.dropbox.com/s/kw6dew3idc0g8c6/Dsp.rar?dl=0 (Original files from V7 installation)

[DragonSF]

One thing still confusing me: it's supposed to be all 64-bit, but everything is still 32-bit (i.e. running in a 4GB space). Any ideas, why?

[JoPo]

Oh ! There IS 2 videos on Scope Zone showing Xite-1 ! I didn't saw them before !
http://scope.zone/index.php?id=1579&lg=en

One from LiquidEDGE and the other from Shay Dan, it's you, Shayart, right ?

[Peter4724]

in all the stages you missed one thing.....( Do not copy DAS dsp files at all )

1-Do not copy DAS dsp files at all ! ! ! It already exists iv v7 !
2-copy only dev files !!! And note that it is 64bit
3-download Here (64 bit)
http://scope.zone/index.php?id=1978&lg= ... dows_64bit

And that will solve the problem

And if you do not want to reinstall....Replace the dsp files From the link
https://www.dropbox.com/s/kw6dew3idc0g8c6/Dsp.rar?dl=0 (Original files from V7 installation)

Thank you!!
I did it the same way and now it works.

Peter

[JoPo]

Yeah ! Great !

Just a dsp files issue !

[shayart]

Oh ! There IS 2 videos on Scope Zone showing Xite-1 ! I didn't saw them before !
http://scope.zone/index.php?id=1579&lg=en

One from LiquidEDGE and the other from Shay Dan, it's you, Shayart, right ?

Yes, it's me
This is old video....
There's another cool newer video About the scope Xite 1...
Dont remember if it here in the forum...
https://www.youtube.com/watch?v=Wugf1Gk ... e=youtu.be

[shayart]

in all the stages you missed one thing.....( Do not copy DAS dsp files at all )

1-Do not copy DAS dsp files at all ! ! ! It already exists iv v7 !
2-copy only dev files !!! And note that it is 64bit
3-download Here (64 bit)
http://scope.zone/index.php?id=1978&lg= ... dows_64bit

And that will solve the problem

And if you do not want to reinstall....Replace the dsp files From the link
https://www.dropbox.com/s/kw6dew3idc0g8c6/Dsp.rar?dl=0 (Original files from V7 installation)

Thank you!!
I did it the same way and now it works.

Peter

your welcome
glad to help...

[dawman]

Anyone care to share a newly skinned project window?
I need to be tormented.

How’s the XITE-1 working with new resource management?

Any new modules?

Ankyu

[JoPo]

Anyone care to share a newly skinned project window?
I need to be tormented.

How’s the XITE-1 working with new resource management?

Any new modules?

But aren't you on earth ??
New colors in the project window :

7.0.jpg (304.91 KiB) Viewed 100554 times

Scope 7.0 is the most stable / Xite dsp friend version ever ! There are still some improvements to do but it's worth it !

[Liquid EDGE]

Oh ! There IS 2 videos on Scope Zone showing Xite-1 ! I didn't saw them before !
http://scope.zone/index.php?id=1579&lg=en

One from LiquidEDGE and the other from Shay Dan, it's you, Shayart, right ?

Cool.

Bit old, need to get round to doing a new one with v7 at some point.

[JoPo]

Bit old, need to get round to doing a new one with v7 at some point.

You said it !

[dawman]

Nice JoPo.
Thanks.

I’m on the road with hardware.
No PC except iPad.
Acoustic Piano Solaris and a giant termite infested spider web crusty ass B3 / 147 Leslie.

They are a Cumbia Band.
Smokin chick singers dancers, male singer is a Hispanic Elvis.
I needed to bypass Mexico for drugs.
Think Ill use the Hammond Organ to smuggle a new wife, and the Leslie for drugs.

If I disappear I’ll be singing the Jailhouse Rock...
Catch you in 2024....

[dante]

I have V7 reinstalled clean and then the dsp, sys .. files from DAS, Orbitone .... copied. The Legend and Master it EQ crash Windows. I will try a different method tonight.

Are you using the lite version of MASTERIT ?

[faxinadu]

holly cow jopo! nice one <3

[Liquid EDGE]

By the sounds of things. When it comes to installing stuff, I’m going to copy and paste my Entire Scope Xite folder and then just run the v7 installer. None of this fresh install re install re copy etc. Just over write with v7 installer. And then copy back preset files.

Good to have a folder of the v7 dsp folder just in case. Thanks shay and jopo.

[Liquid EDGE]

Anyone care to share a newly skinned project window?
I need to be tormented.

How’s the XITE-1 working with new resource management?

Any new modules?

But aren't you on earth ??
New colors in the project window :

7.0.jpg

Scope 7.0 is the most stable / Xite dsp friend version ever ! There are still some improvements to do but it's worth it !

I wonder if you can remove the multi fx in front of the mixer now due to v7?

[JoPo]

I wonder if you can remove the multi fx in front of the mixer now due to v7?

You mean all inserts I use inside the STM ? Well... I'm quiet sure that even with Scope 57.0 (like firefox !) , it will be much more good for dsp's power to do like that.
I think it distributes better on each dsp the load than all in only one device. Moreover, I use to have the 2 multifx you see before the DC filter in which there is my mastering chain (reday for when the project is finishing but muted before) , one inside the second and it is what crashed Scope 7 when loading.

After having separate them, I get back some dsp's power. And nomore crash. I'm very satisfy by Scope 7 : it is good for Xite-1 dsp's ! It seems to have even more power than with 5.1 !