Hello, I have a few computers that have been turned off for a while due to personal reasons. After a while, I turned on the computer again and there were some cards that were not recognized even though everything was running fine before.
How should I clean the cards so they can be recognized well? Thank.
PCI card not recognized
Re: PCI card not recognized
I would remove all cards and other components, cleaning, i'm also using air compressor and back, card by card into slots.
For cleaning not sure, maybe "dry cleaner for electrical contacts" or similar. Didn't have to use it so far, just air compressor.
Best luck.
For cleaning not sure, maybe "dry cleaner for electrical contacts" or similar. Didn't have to use it so far, just air compressor.
Best luck.
Re: PCI card not recognized
I always use pure alcohol (or 98%) and an ear clean stick. Dip it in and clean the contacts.
Re: PCI card not recognized
Capacitors tend to suffer the most when devices are powered off for for a long time
-
- Posts: 549
- Joined: Tue Jun 23, 2009 10:55 am
Re: PCI card not recognized
You should take a look in device manager. Are there devices listet with "!" or similar symbols ?
Sometimes it's just a driver issue.
To my experience, scope cards appear in device manager, even if they have capacitor problems.
Sometimes it's just a driver issue.
To my experience, scope cards appear in device manager, even if they have capacitor problems.
\\\ *** l 0 v e | X I T E *** ///