Hi all !
Just checking if anyone use max/msp and what you do with it ?
Greetings
Mehdi
Max/msp ?
Re: Max/msp ?
Used to use it a lot more, for the most part I used it for 1. Ableton Devices that were interesting 2. to connect multiple parameters in Ableton in the same way you can do in Bitwig with a lot less effort (might switch eventually).
Re: Max/msp ?
personnally i want to try max gen~ because it can be embedded in MCUs like electrosmith's Daisy. Pure Data seems to be unstable here so this option is not an option yet. I could port spacef osc and filter to a eurorack digital module like patch init. ... at least that's what i want to try . an idea that made its way since this thread viewtopic.php?t=22936 . There is also Teensy and stuff like that but for the moment the boards or DACs are out of stock (but a krOn like hardware could be done, there are screens that can load png animations).... + I am not a C/python/javascript programmer at all so the learning curve might be steep and long because beyond the audio features there's the preset save/reload part (user end global customize functions, save to sd card etc)
But I would regret not trying so, I am trying....
But I would regret not trying so, I am trying....
-
- Posts: 77
- Joined: Fri Dec 21, 2018 3:22 am
Re: Max/msp ?
krOn eurorack! Great plan!
I recently used these on a project STM32F407VET6 STM32 Cortex-M4 Development Board NRF2410 FMSG
STM32F407VET6: the high performance STM32 MCU which features:
Core: Cortex-M4 32-bit RISC
Feature: a full set of single-cycle DSP instructions
Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
Operating Voltage: 1.8V-3.6V
Package: LQFP100
Storage Resources: 512kB Flash, 192+4kB SRAM
Resource: 3 x SPI,3 x USART, 2 x UART, 2 x I2S, 3 x I2C; 1 x FSMC,1 x SDIO,2 x CAN; 1 x USB 2.0
FS/HS Controler(with DMA); 1 x USB HS ULPI; (used for external USB HS PHY)1 x 10/100 Ethernet
MAC;1 x 8 to 12-bit parallel camera interface; 3 x AD(12 bit,1us),2 x DA(12 bit)
Thought the feature of a full set of single-cycle DSP instructions looked interesting.
A lot more expensive than teensy though
Will you be documenting the build?
I recently used these on a project STM32F407VET6 STM32 Cortex-M4 Development Board NRF2410 FMSG
STM32F407VET6: the high performance STM32 MCU which features:
Core: Cortex-M4 32-bit RISC
Feature: a full set of single-cycle DSP instructions
Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
Operating Voltage: 1.8V-3.6V
Package: LQFP100
Storage Resources: 512kB Flash, 192+4kB SRAM
Resource: 3 x SPI,3 x USART, 2 x UART, 2 x I2S, 3 x I2C; 1 x FSMC,1 x SDIO,2 x CAN; 1 x USB 2.0
FS/HS Controler(with DMA); 1 x USB HS ULPI; (used for external USB HS PHY)1 x 10/100 Ethernet
MAC;1 x 8 to 12-bit parallel camera interface; 3 x AD(12 bit,1us),2 x DA(12 bit)
Thought the feature of a full set of single-cycle DSP instructions looked interesting.
A lot more expensive than teensy though
Will you be documenting the build?
Re: Max/msp ?
impressive number of I/Os .... dosn't seem that expensive ? but i think in Europe it is less available that US or Asia : https://www.amazon.com/HiLetgo-STM32F40 ... B071KBZR58Berny Shoes wrote: ↑Tue Mar 15, 2022 2:21 am krOn eurorack! Great plan!
I recently used these on a project STM32F407VET6 STM32 Cortex-M4 Development Board NRF2410 FMSG
.....
Thought the feature of a full set of single-cycle DSP instructions looked interesting.
A lot more expensive than teensy though
Will you be documenting the build?
I will go progressively in the making, last week i made my first connections of 2 buttons and 2 potis to an arduino
there are plenty of expansion boards to try but they are hard to find right now.
recently, i found this, much more expensive too. https://bela.io/about intresting for its 8*16 bits analog outputs. it's a cool board for beginners like me (i won't buy it though, i will probably get an electrosmith patch init to begin with, because it the one that can accept the maximum number of different languages, then will have to find codes from various places and tutorials etc.
I could document the build for sure, but I wonder if i will be able to do something relevant before quite some time (learning curve, deciding which language, methods etc, implementing). The hardest part is probably the preset management (found a lot of stuff but i dont really get how it works yet just by reading the codes).
Re: Max/msp ?
The language that launched my career 4 decades ago
Re: Max/msp ?
and where are your synths why didn't you make one ? people knowing C not making synths,is that really possible ?