gigabyte x58 ud4 and windows 10

PC Configurations, motherboards, etc, etc

Moderators: valis, garyb

Post Reply
bosone
Posts: 1525
Joined: Sun Mar 25, 2001 4:00 pm
Location: Italy
Contact:

gigabyte x58 ud4 and windows 10

Post by bosone »

is anyone using the gigabyte x58 ud4 motherboard with windows 10?
any issue??
i see there is no official driver...
thanks!
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: gigabyte x58 ud4 and windows 10

Post by garyb »

it should work.
the chipset drivers are from Intel, and they will work. other peripherals might be a problem.
bosone
Posts: 1525
Joined: Sun Mar 25, 2001 4:00 pm
Location: Italy
Contact:

Re: gigabyte x58 ud4 and windows 10

Post by bosone »

thanks!

my other peripherals are just scope and the video card, which could be changed...
i suppose HDD/SDD chipset will be supported as well. i don't use raid or any other stuff from the mainboard (lan, audio, etc)
User avatar
valis
Posts: 7306
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: gigabyte x58 ud4 and windows 10

Post by valis »

Give exact model # (and revision if possible) for onboard device evaluation.
dawman
Posts: 14368
Joined: Sun Jul 24, 2005 4:00 pm
Location: PROJECT WINDOW

Re: gigabyte x58 ud4 and windows 10

Post by dawman »

All of the Bloomdale era Ultra Durables were used by Vision DAW for several years.
They claimed 100% customer satisfaction.
djmicron
Posts: 1181
Joined: Wed Jul 23, 2003 4:00 pm
Location: Milano

Re: gigabyte x58 ud4 and windows 10

Post by djmicron »

Had the UD7 model, it's a solid motherboard, only 2 issues were slow post initialization and the low quality Marvell SATA chipset.
Your model should be free from the Marvell.
Also it's a motherboard very selective on the installed RAM, so check compatibility and don't use mixed RAM.
It's a very good motherboard and click free with Scope from my experience.
Post Reply