Scope without drivers.

A place to talk about whatever Scope music/gear related stuff you want.

Moderators: valis, garyb

Post Reply
AndyP13
Posts: 27
Joined: Sat Dec 01, 2007 2:16 am

Scope without drivers.

Post by AndyP13 »

Hi.
I have a few Scope cards I’m my PC but am using a Desk via USB drivers...could I use the instruments and effects on the card or is this not possible?

Andy.
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Scope without drivers.

Post by garyb »

you can use them, but not through Windows. analog/sp-dif/ADAT i/o only.
AndyP13
Posts: 27
Joined: Sat Dec 01, 2007 2:16 am

Re: Scope without drivers.

Post by AndyP13 »

How do you mean not through windows?
I’m using Cubase 11 connected to a Behringer Wing via USB. I have the scope software installed on the same windows computer...but if I can’t use Windows..how could I see what I want to use?
nebelfuerst
Posts: 478
Joined: Tue Jun 23, 2009 10:55 am

Re: Scope without drivers.

Post by nebelfuerst »

Scope has no USB-input. In windows, you can see your midi device of behringer and scope. Just use a tool to "bridge" them together in windows, so I get your scope controlled by the wing.
( I use MidiOx for brindging, but there might be much more. Maybe even Cubase 11 could be used to use the wing for input and scope for output.)
\\\ *** l 0 v e | X I T E *** ///
User avatar
t_tangent
Posts: 970
Joined: Sun Dec 28, 2003 4:00 pm
Location: UK

Re: Scope without drivers.

Post by t_tangent »

How about that USB device by Faxi that allowed USB keyboard straight in to Scope. Can’t remember name off hand but might be worth a look
User avatar
garyb
Moderator
Posts: 23248
Joined: Sun Apr 15, 2001 4:00 pm
Location: ghetto by the sea

Re: Scope without drivers.

Post by garyb »

you can route midi through Cubase to Scope. the Wing has midi i/o as well.
imagination and the manual....
User avatar
astroman
Posts: 8406
Joined: Fri Feb 08, 2002 4:00 pm
Location: Germany

Re: Scope without drivers.

Post by astroman »

AndyP13 wrote: Sun Feb 21, 2021 9:54 am I’m using Cubase 11 connected to a Behringer Wing via USB. I have the scope software installed on the same windows computer...
You could send the output of Scope synths via Asio channels, but Cubase doesn‘t allow 2 Asio drivers at the same time.
If you connect the Wing via WDM, then Cubase can use the Scope Asio for synths - but this is probably not what you want, as latency will increase significantly with WDM.
You might try Asio4All, which is similiar to Apple‘s „Aggregated Device“ strategy, but don‘t expect too much.
It sometimes works, but mostly fails... and latency will increase, too.

That‘s why Gary suggested to send Scope synths via hardware in/out to the Wing. It‘s reliable and low latency.
User avatar
valis
Posts: 7306
Joined: Sun Sep 23, 2001 4:00 pm
Location: West Coast USA
Contact:

Re: Scope without drivers.

Post by valis »

And better than ASIO in terms of latency
Post Reply