PlanetZ forums - scopeusers.com

I've gotten Mixbus3 32bit and Scope 3.1c to work OK - except for clicks every now and then. Now, (thanks to S|C for the year-end special and for garyb for expediting things - you guys rock!) it's time for SonicCore 5.1 and Mixbus3 x64 to co-operate.

What works: (re: x64 on W7.1) Playback from ...

Thanks at0m,

You are right about WINE. I've started to learn more about WINE. It seems to be an issue of Scope drivers. WINE and kernel drivers don't like each other.

I would like a perfect DAW based on Scope. And (for me) the closest - perfect - DAW that works is Harrison Mixbus3 on Scope 3.1c ...

Who has run Scope on Linux?

I've tried to run Scope on AVLinux 6.04 using WINE, but the drivers won't cooperate. Things look good - until that point. Scope 5.0 on Linux goes further than 4.5 Linux or 3.1c Linux, but that's because Scope 5.0 introduces the drivers later (I think).

Scope tells us to ...

Two big changes:

1. Run As - I kept Current user, but I un-ticked "Protect my computer and data from unauthorized program activity"

2. I installed Mixbus3(x86) 1970

How it works: Start > All Programs > Mixbus3(x86) > Run as... > ticked = Current user (name\name) - unticked = anything else > OK ...

To Run Mixbus 3 on Creamware Scope - At least for one time

Start with a new hard drive (or a completely cleaned used hard drive)

Install Windows XP3 (I do it by installing Windows XP1, reboot, run Windows XP3)

reboot

Install Scope 3.1c

reboot

Install Harrison Mixbus 2.5

reboot

Setup Scope ...

... if you're trying to do something stupid like run v3.1 in win10...

Busted! Though it was for 'science.' Oh well, on to the next experiment of joining Scope and Mixbus. Since I don't have a 64bit Scope, (both 'John' and 'Ringo' are 32bit at the moment) I decided to see if a different (very ...

Search won't let me use "2N" - and there are over 7000 uses of 'add' - I'm trying to install 3.1C and when I get to the "Problem" it says:

Can't find DSP file Add 2N - Please check installation.

Any idea what this is?

What ever it is, I can listen to Scope. At least until I shut it down ...

It works - sort of.

I used one combination last night with Mixbus 2.5, Scope 3.1C, and Windows XP2. (I played 6 tracks 24bit ADAT from an HD24 via lightpipe to channels 1 - 6 ADAT A Source. To 1-6 of 2448 it went directly, and an ASIO2-32 Source 64 went to channels 20 and 21 of the 2448. From the ...

If I were in your situation, I'd do the following:

Remove both Scope cards

Pull apart the Scope Pro and clean the pins (I like Stabilent 22)

Restore only the Scope Pro and see what happens

good luck

Really good,

jksuperstar wrote:Do you have SCOPE 5.1?

I have that working with ASIO and Wave under both x86 and x64 versions of windows 7 and 8.1.

Thanks but I'll have to wait until the next 'super sale' before I can afford 5.1.

best, john

I've gotten some of Scope under x32 Windows 10 to work but:
1. ASIO doesn't work under anything (Windows 7.1 and various 'flights' of Windows 10) - I'm not surprised.
2. Wave dest and sources (16 and 24) don't work under Windows 10 (flight 10041 and later). But I don't remember whether or not the ...

bosone wrote: I armed them and the red light blinks....

After the red blinks, then you must hit the Rec button and then the red should be steady. Is that what happens for you?

best, john

...
By the way where I can read more of your series senior linux jta? It seems fun and very helpfull !

Thanks mz2250. Try this:

http://www.dailykos.com/story/2013/09/01/1235584/-Senior-Linux-v-001?showAll=yes

http://www.dailykos.com/story/2013/09/02/1235823/-Senior-Linux-v-002?showAll=yes

http ...

hi mz2250,

Workstations!

I really like HP workstations (especially the HP XW4400 > HP XW4600 > HP Z400 line). Other people like Dell workstations or Lenovo (formerly IBM) workstations.

How to spot a workstation.

If you've worked in a cubicle with a desk and a chair, you've probably used a ...

thewre ias no aspi driver for win32 it was dropped after win98

because microsoft did not want to pay for the licence...



Thanks jhulk. "ASPI for 32 bit Win 7?" was a correct title, still the wording was poor. I have no interest in ASPI itself. Only as a step to installing SFP. Your information ...

Here's the stuff:

1 - a PCI slot (in either a HP XW4600 or a Z400)
2 - a Creamware card (a Scope - I think it's 15 - then a Pulsar 1)
3 - 4.5 SFP
4 - Audinate Dante with 48 channels (ASIO via Dante)
5 - Windows 7 - 32 bit Pro

Here's the question: the Adaptec ASPI driver used to be required. Is it ...

...
... without Scope 4.5:
...
HP Z400 = 2 PCI slots, Xeon 4 core, 3 DRAMs (+3 empty) equaling 3 GHz, Windows 10, Quadro FX 1700

HP XW4600 = 3 PCI slots, Intel Core 2 Duo (E8400), 4 DRAMs (full) equaling 4 GHz, Windows 7, Quadro NVS 290
...
Guess which.
...
thanks,

john

Thanks garyb and jhulk.

There are about half as many XW4400s as there are XW4600s on eBay right now and zero XW6000s. Guess the corporate replacement cycle is in-between, putting the XW4600 in the Goldilocks zone for 1Q 2013.

I've read that lower-clocked Xeons can be faster than some of their ...

I'm trying to help a non-profit theater spec an affordable PC that would be capable of running Scope and Pulsar PCI cards (v 3.1C) together with the Dante Virtual Soundcard (connected via CAT 5e or CAT 6 to an Allen & Heath iLive fixed series Mixrack).

I first saw favorable mention of the HP XW4600 ...