PlanetZ forums - scopeusers.com

This problem has come back to haunt me again ! It's hard to explain because I can't exactly put my finger on what is going on. I know it's not a Cubase problem because the ADAT will not sync even in SP with XTC mode switched off. Rebooting or even powering off my PC does not help either.

Testing ...

ok so you think there could be some dust or dirt in there, I had not considered that. I will look at cleaning it next time I pull the machine out, which is about a 20 minute job these days because of all the stuff it's connected to....

Interestingly enough I just tried a little experiment and ...

Yesterday I rebuilt my DAW, Windows XP, downloaded all the latest updates, installed a virus scanner, cubase 4 and Scope 4.5... everything worked fine I was able to use Scope fine and it would sync up to my Yamaha 03D YGDAI interface via ADAT optical. However today after doing nothing to it at all ...

kylie wrote: I got the tip from the asus hotline to heat up the cooler with maybe a lighter, but I preferred to put it on top of my toaster. and, voila, some toasts later I was able to pull the cooler off easily (more or less).

maybe a hairdryer would be good for this ???


RvR

hmmm very intersting. I get exactly the same clicking problem with my Pulsar II card while it is connect via ADAT to my Yamah 03D mixer. The mixer is slave and the card is master. The problem seems to be there when I am just working on the dekstop, but disappears when I start cubase. I never really ...

It may be too late to mention this now but what the heck..... Just be careful with the Arctic Silver, since it is electically conductive. If you use to much paste and it spills over the side and onto the motherboard it can cause a short and destroy things. This happened to a friend of mine and why I ...

I'm confused here... the spec you posted for your PSU clearly shows the amperage for each rail...

Power Output:
+3.3V: Min 0.3A, Max 30A
+5V: Min 1.5A, Max 40A
+12V: Min 0.2A, Max 18A
-5V: Min 0.0A, Max 0.3A
-12V: Min 0.0A, Max 0.8A
+5VSB: Min 0.0A, Max 2.0A


I see 18 Amps for the +12v rail ...

I didn't mention I have a Scope Pro full length card so would the cases mentioned be OK?

Have a look at THIS and you can see the inside of my system with a Pulsar II installed. It fits ok. Is the Scope Pro longer or the same length ?


I am not bothered about the water cooling as long as the ...

What you are suggesting is certainly possible, and wouldn't be that difficult....

You didn't really mention your budget, if money is no object, you should look at the Zalman 500A Fanless case. Probably the best solution for a studio..... Personally I would keep away from water cooling, as it can ...

Many producers are using GLITCHto make sounds like this, including myself. I realise that it is not a Pulsar/Scope plugin, but it is oustanding none-the-less, and free !

RvR

Mobo: p4c800 Deluxe
CPU:3.4ghz Prescott P4 H/T 1MB Cache, O/C to 4.08ghz
Ram: 2gig Geil

Pulsar II 6 DSP

PCI Latency set to 64

DSP Load is at 100% with 9 loaded, loading 10 causes the error: 'A capacity limit of your DSP cads has been reached'


RvR

ahhhh yes... the standard practice for removing ANY hardware would be to remove all the software and drivers FIRST..... then pull the card out.....



RvR

There should be an uninstall icon under the SCOPE menu in your start menu. try that.

RvR

Mmm, am I the only one who is interested in how he hacked the sts sampler to work within xtc mode?

I thought that this was common knowledge...?? It seems to be mentioned in every second post (well maybe that's an exaggeration! :) )

take a look at THIS thread and there is some explanation on how ...

I kick butt three times a week..... it keeps me active....

RvR

thanks.....

yes, I do intend to upgrade to 4.5, once I get the license name transfer sorted out with Creamware (do you think that will be necessary ?) and I might get a few new plugs while I am at it. As for more DSP cards, well I will leave that for the moment, since the internals of my computer are packed ...

wow... talk about a thread hijack...! :lol:

I didn't really expect so many replies so quickly.... thanks for making me feel welcome.... and just to let you know, I just cracked open my first beer for the evening, so I might be joining you in 'strunken' land soon.... :lol:

anyways getting back to ...

I have XP SP2 and ALL the latest updates, I just jammed in a Pulsar II card yesterday and things are running very very fine !! both normal and xtc mode.... loving it !

RvR

Hiya...

Just bought a second had Pulsar II card yesterday...... Loving it so far !! I have about 10 years experience in electronic music production so I have managed to work out how normal mode and XTC mode work without too much trouble..... and even hacked a few plugs to work with XTC, such as ...