PlanetZ forums - scopeusers.com

Is your IRQ problem solved yet?

Read the tripleDAT manual, it is very well explained.

IRQ 15 is generally used for IDE controller, hence rarely available.

I would set the jumpers on the tripleDAT board in the factory default position, i.e. IO address 300 hex and IRQ 11.
Find an ISA slot on your ...

Some more answers:
- tripleDAT is an ISA board, so you need a rather old motherboard with ISA slots.
- tripledat 3.06b is the latest and last version - very reliable and stable.
- as far as I can see, the Compaq CR 587 is a CD-ROM, not a burner.

I still use tripleDAT. It is very fast and efficient ...

Here is a good explanation: http://www.rane.com/note149.html

Neutrik and Canare supply 110 - 75 ohm impedance transformers (XLR - BNC connectors):
http://www.neutrik.com/us/en/audio/204_654550159/AES_EBU_Impedance_Transformer_productlist.aspx
http://www.canare.com/ProductItemDisplay.aspx ...

The A16 ultra power supply is a simple transformer:
input: 230V AC, 50Hz, 130mA, 29.9VA
output: 12V AC, 50Hz, 1540mA, 18.5VA

made by FRIWO
model # FE4830 120A154PE

It runs pretty hot.

I 'v been using cans for several decades, and built analog crossfeed devices with and without delay.
Would be much interested to compare results.
Cans: Sennheiser HD25, Beyer DT880, Koss ESP9, Sony CD3000
Speakers: Genelec 2029B + 7050, Quad ESL54

Well, a Dolby-A encoder is a multi-band level dependent COMPRESSOR, the decoder is the expander part.

Jos

After installing SFP on my new PC, I get the following error message:

"Can't find DSP file fms2a.dsp - Please check installation."

However, the file is present in C:/SFP/App/Dsp !

I never got this message before.

Exactly the same problem with my new Dell Dimension 8400.
Applied all the hints and tweaks.
No IRQ conflict (18).

It sounds like the computer is not recording all the samples, but from time to time skipping a few.

What's the solution???
It must be a Windows XP / resource issue, since it works well ...

Exactly the same problem with my new Dell Dimension 8400.
It sounds like the computer is not recording all the samples, but from time to time skipping a few.

What's the solution???

Indeed, I removed half of the RAM, such that only 512MB is left. Windows 98 runs perfectly now, hence I can use the TripleDAT plugin.
Microsoft mysteries...

I used SFP with the tripleDAT plugin for several years.
However, I can't get SFP running under Windows 98SE on my new Dell Dimension 8400 PC (1 GB of RAM).
After starting SFP, the system complains about insufficient RAM...
I tried the tricks with VCACHE MinFileCache=524288 and MaxFileCache=524288 ...

Quote from the German magazine "PC & Musik" Oct/Nov 2004, on page 11:

"News from Creamware

"Creamware re-issues the legendary tripleDAT software, as 32-bit capable Windows XP version. The software runs on all DSP boards of the Scope platform and costs between 198 and 398 EUR, depending on the ...

B.P.M. is a German brand, but like many of the new brands, their microphones seem to be made in China by Beijing 797.

http://www.bpm-studiotechnik.com/
http://www.studioprojects.com/
http://www.797audio.com/

Drivers for recent CDR writers can be downloaded from Roxio:
http://softwareupdates.roxio.com/gm/products/en/woc/unidrv/unidrv-1-20-0.exe
(most importantly the Gri_mmc.dll driver)

TripleDAT uses the Cequadrat CDR engine, which was acquired by Roxio.

It's fairly straigtforward to edit the Trpl ...

Optical S/PDIF only works on the ADAT A ports, not on B.

To avoid click, you must select "Slave" on the "Samplerate Settings" menu.

Jos

What's the status of the new 32-bit editor for tripleDAT or Scope? When will it be available to existing 3DAT users?


On 2003-10-29 08:06, CW Frank wrote:
Hi friends, I can confirm we're working on another version of this new generation editor that will become available as an upgrade for SFP at ...

Thanks for the advice. I reinstalled 3DAT. Pray and see...

A google search revealed that TripleDAT is not the only program suffering from BC450RTL.dll freeze.
Various other programs relying on this Borland DLL show similar behaviour.

Happy New Year

When I merge Osiris Denoiser effects using TripleDAT 3.11b and SFP 3.1c,
Borland's BC450RTL.dll (v.1.5) locks up at 99% of the merge process.

Anyone knows a fix?