PlanetZ forums - scopeusers.com

I've added some pictures to the gallery (https://imgur.com/a/CtAuWwh) showing a pulsar card fitting in a Thermaltake Black Suppressor F31 case, it's wide enough that the card doesn't stick out the side of the case. Just needs some support and some holes drilling for the connectors.

The extra height is something to overcome, but not a major problem in my opinion.
If you look in the video at this frame:
https://i.imgur.com/F5Zh4Nw.png
You can see that it doesn't stick out beyond my normal ITX case's side wall. Yes, the ADAT ports are inaccessible, but only if you're unwilling to ...

Good news to report!

I took a punt on this PCI Express to PCI adapter from Aliexpress:
https://www.aliexpress.com/item/1005004965714989.html?spm=a2g0o.order_list.order_list_main.10.20411802IfaJCj
(PCIE to PCI Adapter PCI Express X1 to PCI Expansion Card Riser ASM1083 Chipset PCI-E Converter ...

This is huge news that someone has got PCIe-PCI adapters to work!

Please do this test:

How many basic Masterverb modules (not Masterverb Classic or Pro) can you load into an empty project before you get an error about reaching PCI capacity?

Also some photos of the card install would be great!

My list of motherboards still with PCI:
https://docs.google.com/spreadsheets/d/ ... sp=sharing

Just had a weird thing happen:

Scope was running fine, decided to add a delay somewhere.
Found that the delay effect wasn't happening. I could hear the dry signal, not the wet.
When I set dry to 0, it muted the signal.

Tried multiple delay effects, Delay LM, Delay M, Delay S, even some 3rd party ...

Any recommendations for a 2 channel stereo mixer?

I want a really small super basic mixer.

The "micro mixer" is still 4 channels input.
If I make one in Modular it'll have four outputs.

All I want is two stereo inputs and one stereo output.

(Why small? I'm trying to keep my routing window tidy ...

I couldn’t find a board with PCI slots

I maintain a list of PCI motherboards here:
https://docs.google.com/spreadsheets/d/ ... sp=sharing

I've added the Asrock IMB-1713 and DFI RPS631-H610 to my list of Sonic Core Scope Motherboards:
https://docs.google.com/spreadsheets/d/ ... sp=sharing

I gave the inside of the d-sub a good squirt with my air jet to clear out any dust but it didn't help.

I have, however, found a work-around!

I have a second soundcard with a working MIDI input, so I am using the ancient MIDI software "MIDI OX" to route MIDI from my second soundcard's MIDI input ...

OK, so 6 months have gone by and my MIDI inputs are not working any more.

I ordered some Caig Deoxit and treated all the connections on my cards and I/O board, but no joy.

Over the years the plastic screws that held the I/O board sandwiched to the main card have slowly been failing for me and I'm ...

Here's a photo of the other sort of IO plate for comparison (albeit with replaced capacitors)

It also works if you use "ASIO Link Pro" as per these instructions:
https://forums.scopeusers.com/viewtopic ... io#p343973

Cakewalk is my main DAW at the moment. I find it to be generally very good, but the GUI does get a little laggy on larger projects.
e.g. Opening the quantize dialogue takes a couple of seconds.

My MIDI input had stopped working.

I gave my daughterboard a wiggle to re-seat it on the header pins.

MIDI input is working again

I'm trying to make a guitar distortion modular patch and wanted to add a feedback chain to simulate amp feedback.

When I connect the feedback it complains about recursion without delays.

https://imgur.com/a/u58KOfk

Normally, outside of Modular, I get around this by adding a delay plugin into my ...

What's the stabilizer?

I've added you to the spreadsheet
https://docs.google.com/spreadsheets/d/ ... sp=sharing

There are some component suggestions on this slideshow:
https://docs.google.com/presentation/d/ ... sp=sharing

Acknowledged, I just wanted to trigger any thread subscriptions people may have. : )