Hi,
As has been pointed out - Pulsar 1 has higher latency than Pulsar 2 - And as I've collected a number of used cards at some point it would be planned to build a system comprising
Pulsar 1 - balanced input / output XLR _ this is good no?
Pulsar 2 Z-Link - unbalanced
Pulsar 2 - unbalanced
This would be a mixed system - and it would be favoured to use XLR output for better "pro" levels
The two Pulsar 2's should be able to get the lower latency - but what if the Pulsar 1 XLR's were used for output?
Is it still possible to use this system at the lower latency of gen 2 cards - Are there any drawbacks here?
I got the Pulsar 1 because it wasn't too expensive and was available
Mixed cards gen 1 & gen 2
Re: Mixed cards gen 1 & gen 2
Simple answer: it doesn‘t matter...
I never noticed any io problems with a Pulsar 1 in combination with a generation 2 card and lower ULLI settings.
The system just performs as expected.
![:D](./images/smilies/icon_biggrin.gif)
I never noticed any io problems with a Pulsar 1 in combination with a generation 2 card and lower ULLI settings.
The system just performs as expected.
Re: Mixed cards gen 1 & gen 2
Make the 2nd gen card the master, or alternatively ensure that the 1st gen card(s) is(are) not. Whichever comes first in the DSP meter used to indicate, I do not know if Scope 7 has been adjusted to do this automatically (it does a lot more than older versions do in terms of not needing to edit CSET.ini any longer for most things).
Re: Mixed cards gen 1 & gen 2
gen2 cards handle resources better, but all will work together just fine. the SC versions of Scope will use the newer cards as master.
Re: Mixed cards gen 1 & gen 2
That's what it seemed like, but wanted to verify before posting as such. Thanks.
Re: Mixed cards gen 1 & gen 2
Hi - OK - Best to use the newer cards as master - But still be able to use the XLR output on Pulsar 1 for the hotter signal - (route anything anywhere) - This would work wouldn't it - I hope so..... and if so, it gets round that problem easily -
Re: Mixed cards gen 1 & gen 2
it will work.
- Bud Weiser
- Posts: 2708
- Joined: Tue Sep 14, 2010 5:29 am
- Location: nowhere land